Net price: €34.21
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø26 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 286 mm |
| Flute length l2 | 165 mm |
| Morse taper | MT3 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø26 mm HSS twist drill with an MT3 taper provides stable drilling of large-diameter holes in steels with tensile strengths up to 900 N/mm². The MT3 Morse taper mounts directly in the spindle without intermediate clamping components, eliminating sources of radial runout. The Ø26 Morse taper drill can be used in setups with MT3→MT4 and MT3→MT5 reduction sleeves.
The Ø26 mm Morse taper drill bit is used to manufacture infrastructure components — columns, supports, brackets, and load-bearing frames. In steel construction, hole diameters of 23–31 mm correspond to M22–M30 bolts. An H12 tolerance of Ø26.000–Ø26.210 mm is sufficient for through holes.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø26 MM DRILL BIT:
| ✓ | MT3 → MT4 — for a spindle with an MT4 socket |
| ✓ | MT3 → MT5 — for a spindle with an MT5 socket |
| ✓ | MT3 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø26 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.20 | 135÷245 | 27÷49 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.20 | 159÷196 | 32÷39 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.25÷0.32 | 306÷343 | 76÷110 |
The Ø26 mm drill requires a drilling machine with at least 1.5 kW of power and a rigid pillar or box-column construction. Bench drilling machines do not provide sufficient rigidity — resulting in runout, vibration, and accelerated cutting edge wear.
Range of workpiece materials and application limitations
An HSSE drill bit contains 5% cobalt, which increases heat resistance from 600°C to 650°C. The practical difference: HSSE performs much better in stainless and difficult-to-machine steels. When machining only carbon steels, the difference in tool life is minimal.
Use peck drilling: retract the drill every 1–1.5×D, clear chips from the flutes, and cool with a 6–8% emulsion. Reduce the feed by 30–50% from the nominal value.
Spot drilling is not necessary on flat surfaces in structural steels. Spotting with a 90° NC spotting drill is recommended when drilling on inclined surfaces, castings with machining allowance, and flame-cut surfaces.
Reference: 1180 In stock > 10 items
€22.66 brutto
Reference: 11965 In stock < 10 items
€45.32 brutto
Reference: 5702 In stock > 10 items
€32.37 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.