Net price: €310.53
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø75 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 447 mm |
| Flute length l2 | 260 mm |
| Morse taper | MT5 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø75 mm twist drill with an MT5 taper is a specialized tool — diameters above 50 mm require machine tools with at least 4 kW of power and a rigid box-column construction. At Ø75, the transverse chisel edge generates a significant portion of the axial force — a Ø20–25 mm pilot hole is essential for safe operation. The Ø75 Morse taper drill transmits full torque thanks to its MT5 taper with a diameter of 44.40 mm.
The Ø75 Morse taper drill is designed for specialized drilling operations in heavy machinery plants and shipyards. For diameters in the MT5 range, every operation requires planning — from the pilot hole to the selection of cutting parameters. H12 tolerance holes, Ø75.000–Ø75.300 mm; fits are achieved by boring.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø75 MM DRILL BIT:
| ✓ | MT5 → MT6 — for a spindle with an MT6 socket |
| ✓ | MT5 → MT4 — not recommended (socket capacity below the operating load) |
| ✓ | MT5 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø75 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.40 | 47÷85 | 19÷34 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.40 | 55÷68 | 22÷27 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.50÷0.63 | 106÷119 | 53÷75 |
The Ø75 mm drill should not be used without a pilot hole. Drill a pilot hole using a Ø20–25 mm drill — this reduces axial force by 40–50% and eliminates engagement of the chisel edge responsible for vibration. At depths greater than 150 mm (2×D), use peck drilling with retraction every 30–40 mm and ample coolant (min. 8% emulsion, 8 l/min).
Range of workpiece materials and application limitations
Yes — gray cast iron (GG20–GG30) and ductile cast iron (GGG40) are well suited to HSS drills. Short, brittle chips are easier to evacuate from the flutes than steel chips. Dry drilling with a compressed air blast is possible.
H12 tolerance as standard. Reaming or boring is required for H7 or tighter fits — a twist drill cannot achieve these tolerances without finishing.
At least 4 kW of motor power and an MT5 or larger spindle. When drilling S355 steel, torque at the drill reaches 187 Nm — bench and magnetic drilling machines do not provide sufficient rigidity. The optimal machine is a box-column or radial drilling machine with power feed.
Reference: 1187 In stock < 10 items
€55.03 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.