- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Drill 13 NWKc HSS DIN 345
976201
Diameter (mm): 13301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€9.06 tax inc.
Net price: €7.37
Description
DIAMETER Ø13 mm
MORSE TAPER MT1
OVERALL LENGTH 182 mm
FLUTE LENGTH 101 mm
Technical specifications of the Ø13 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø13 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 182 mm |
| Flute length l2 | 101 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø13 mm HSS metal drill bit – Morse taper MT1
Product description and key benefits
The Ø13 mm twist drill with an MT1 Morse taper is an alternative to straight-shank drills wherever a drill chuck does not provide sufficient clamping rigidity. Direct mounting in the spindle of a pillar drilling machine eliminates the intermediate link — the chuck — which can become a source of runout and slippage during intensive use. The Ø13 Morse taper drill is particularly suitable for metalworking shops and toolrooms, where hole position accuracy matters when fitting pins and bushings.
Key benefits of the Ø13 mm metal drill bit
- Secure MT1 taper mounting — the self-holding taper conforming to DIN 345 transmits cutting torque without intermediate components — no drill chuck is required
- HSS steel resistant to temperatures up to 600°C — the cutting edge retains its working hardness at the cutting speeds recommended for structural steels and cast iron
- Flute length 101 mm — enables drilling through holes in components up to 91 mm thick without extensions
- Self-centering 118° geometry — eliminates spot drilling on flat surfaces — saves time in batch production
- Diameter tolerance class h8 — the predrilled hole is ready for reaming to H7 without an additional boring bar pass
- Full interchangeability according to DIN 345 — identical taper dimensions regardless of manufacturer — the drill can be replaced without adjusting the machine
The Ø13 Morse taper drill is used in maintenance departments for repairing and reconditioning machine components. Standard H12 hole tolerance (Ø13.000–Ø13.180 mm) is sufficient for most through holes; close fits are achieved by reaming.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø13 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø13 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø13 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.12 | 269÷490 | 32÷59 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.12 | 318÷392 | 38÷47 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.16÷0.20 | 612÷686 | 98÷137 |
Drill sharpening
Sharpen the Ø13 mm drill bit on a tool grinder, maintaining the 118° point angle and cutting edge symmetry. Asymmetric sharpening enlarges the hole diameter and loads the spindle unevenly. Each sharpening reduces the flute length by approximately 1–2 mm.
Material compatibility of the Ø13 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø13 mm drill bit
The maximum drilling depth is the flute length l2 = 101 mm minus the drill point length (approximately 4 mm). The effective usable depth is therefore approximately 97 mm.
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spot drilling with an NC 90° drill is recommended when drilling on milled surfaces, castings with machining allowance, or difficult-to-machine materials.
A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.
Product accessories
Reduction sleeve MK4 MK1 1751 PTPa DIN 228
Reference: 1179 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK3 MK1 1751 PTPa DIN 228
Reference: 1184 In stock > 10 items
€11.84
€14.57 brutto
Reduction sleeve MK5 MK1 1751 PTPa DIN 228
Reference: 1185 In stock > 10 items
€22.37
€27.51 brutto
Reduction sleeve MK2 MK1 1751 PTPa DIN 228
Reference: 2586 In stock > 10 items
€9.21
€11.33 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.