- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Drill 30.5 NWKc HSS DIN 345 Baildon
107076
Diameter (mm): 30,5301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€50.17 tax inc.
Net price: €40.79
Description
DIAMETER Ø30.5 mm
MORSE TAPER MT3
OVERALL LENGTH 301 mm
FLUTE LENGTH 180 mm
Technical specifications of the Ø30.5 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø30.5 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 301 mm |
| Flute length l2 | 180 mm |
| Morse taper | MT3 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø30.5 mm HSS metal drill bit – Morse taper MT3
Product description and key benefits
The Ø30.5 mm metal drill bit with an MT3 taper shank to DIN 345 is a tool used under heavy-duty machining conditions on box-column and radial drill presses. Type N flute geometry balances chip evacuation and drill core rigidity. The Ø30.5 Morse taper drill bit is selected by machine builders, repair facilities, and steel fabrication plants.
Key benefits of the Ø30.5 mm metal drill bit
- Self-holding taper shank — MT3 transmits full torque to the cutting edges without intermediate components
- HSS with a hardness of 63–65 HRC — stable cutting of materials with tensile strengths up to 900 N/mm² without loss of sharpness
- Overall length of 301 mm — proportional to the drilling diameter — provides a balance between reach and rigidity
- General-purpose 118° geometry — suitable for most materials encountered in shop machining
- Sleeve compatibility — use on drilling machines with MT2 to MT4 spindles using reduction sleeves
- Repeated resharpening — HSS steel allows the cutting edge to be restored without loss of cutting properties
The Ø30.5 Morse taper drill is used mainly in steel construction — industrial buildings, bridges, and viaducts — where holes with diameters of 23–31 mm are standard for assembly connections. In repair shops, it is used to restore holes in machinery. H12 tolerance (Ø30.500–Ø30.750 mm); H7 fits are achieved with a reamer.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø30.5 MM DRILL BIT:
| ✓ | MT3 → MT4 — for a spindle with an MT4 socket |
| ✓ | MT3 → MT5 — for a spindle with an MT5 socket |
| ✓ | MT3 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø30.5 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø30.5 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.20 | 115÷209 | 23÷42 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.20 | 136÷167 | 27÷33 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.25÷0.32 | 261÷292 | 65÷93 |
Coolant selection for drilling diameters of 23–31 mm
At a diameter of 30.5 mm, the volume of chips removed is considerable — the helical flutes must evacuate a large amount of material. Use an emulsion at a concentration of 6–8% with a flow rate of at least 5 l/min. Without pressurized coolant, limit the depth of each pass to 61 mm.
Material compatibility of the Ø30.5 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø30.5 mm drill bit
The HSS drill can handle stainless steel with Vc reduced by 40% and ample coolant. For regular INOX machining, an HSSE (cobalt) drill of the same diameter is recommended.
A pillar or box-column drill press with an MT3 spindle and a power rating of at least 1.5 kW. For diameters above 25 mm, power feed is recommended — manual feed will not provide uniform pressure.
An HSSE drill bit contains 5% cobalt, which increases heat resistance from 600°C to 650°C. The practical difference: HSSE performs much better in stainless and difficult-to-machine steels. When machining only carbon steels, the difference in tool life is minimal.
Product accessories
Reduction sleeve MK4 MK3 1751 PTPa DIN 228
Reference: 1180 In stock > 10 items
€18.42
€22.66 brutto
Reduction sleeve MK6 MK3 1751 PTPa DIN 228
Reference: 11965 In stock < 10 items
€36.84
€45.32 brutto
Reduction sleeve MK5 MK3 1751 PTPa DIN 228
Reference: 5702 In stock > 10 items
€26.32
€32.37 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.