Net price: €5.00
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø8.3 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 156 mm |
| Flute length l2 | 75 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
Choosing a Ø8.3 mm twist drill with an MT1 taper instead of a straight-shank equivalent is justified wherever the drilling machine has a tapered spindle. Seating the tool directly in the spindle simplifies the process — eliminating the chuck reduces setup operations and the risk of runout. The Ø8.3 Morse taper drill conforming to DIN 345 fits any MT1 spindle, regardless of the machine tool manufacturer.
The Ø8.3 Morse taper drill is used in maintenance departments for repairing and reconditioning machine components. Standard H12 hole tolerance (Ø8.300–Ø8.450 mm) is sufficient for most through holes; close fits are achieved by reaming.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø8.3 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø8.3 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.08 | 422÷767 | 34÷61 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.08 | 499÷614 | 40÷49 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.10÷0.12 | 959÷1074 | 96÷129 |
When drilling blind holes with the Ø8.3 mm drill, allow for the drill point cone — the usable depth is approximately 2 mm less than the set depth. For holes deeper than 24 mm (3×D), retract the drill every 12 mm to clear chips from the flutes.
Range of workpiece materials and application limitations
The maximum drilling depth is the flute length l2 = 75 mm minus the drill point length (approximately 2 mm). The effective usable depth is therefore approximately 73 mm.
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spot drilling with an NC 90° drill is recommended when drilling on milled surfaces, castings with machining allowance, or difficult-to-machine materials.
A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.
Reference: 1179 In stock > 10 items
€19.42 brutto
Reference: 1184 In stock > 10 items
€14.57 brutto
Reference: 1185 In stock > 10 items
€27.51 brutto
Reference: 2586 In stock < 10 items
€11.33 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.