• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Drill 13.7 NWKc HSS - Artykuły Techniczne
search
  • Drill 13.7 NWKc HSS - Artykuły Techniczne
  • Drill 13.7 NWKc HSS - Artykuły Techniczne - nr. 1
Artykuły Techniczne

Drill 13,7 NWKc HSS DIN 345

€7.77 tax inc.

Net price: €6.32

Instant Shipping
W magazynie: 10-100 szt.
W magazynie: 10-100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

DIAMETER Ø13.7 mm
MORSE TAPER MT1
OVERALL LENGTH 189 mm
FLUTE LENGTH 108 mm

Technical specifications of the Ø13.7 mm drill bit

Twist drill with Morse taper shank

TECHNICAL DATA
Diameter Ø13.7 NWKc HSS
Standard DIN 345
Drill type NWKc — twist drill with taper shank
Material HSS (high-speed steel)
Overall length l1 189 mm
Flute length l2 108 mm
Morse taper MT1
Point angle 118°
Diameter tolerance h8
Cutting direction Right-hand

Ø13.7 mm HSS metal drill bit – Morse taper MT1

Product description and key benefits

The Ø13.7 mm NWKc twist drill is distinguished by its mounting method — the MT1 Morse taper eliminates the intermediate component between the tool and the spindle. This results in lower radial runout and improved repeatability of hole dimensions. The Ø13.7 Morse taper drill with a high-speed steel (HSS) cutting edge retains its working hardness up to 600°C, allowing drilling without the risk of tempering the cutting edge.

Key benefits of the Ø13.7 mm metal drill bit

  • Eliminates the drill chuck — the MT1 taper seated directly in the spindle shortens the torque transmission path and reduces radial tool runout
  • Heat resistance up to 600°C — the high-speed steel cutting edge retains its working hardness even at higher cutting speeds in soft and medium-hard steels
  • Interchangeability to DIN 345 — identical taper dimensions across manufacturers allow drill replacement without calibrating the spindle axis
  • Short design (l1 = 189 mm) — reduced tool overhang provides greater rigidity and a better hole surface finish than extended-length drills
  • Holes for locating pins and bushings — the h8 tolerance grade provides a repeatable preliminary size before finish reaming to an H7 fit
  • Low operating cost — can be resharpened repeatedly on a tool grinder without losing cutting geometry while maintaining the 118° angle

The Ø13.7 Morse taper drill is suitable for series production of steel components, where repeatable hole dimensions determine assembly quality. With H12 tolerance at Ø13.700–Ø13.880 mm, holes require no additional machining for bolted connections. More precise fits are achieved with a finishing reamer.

Morse tapers – dimensions to DIN 228

Dimension table for all Morse tapers MT0–MT6

TaperDiameter D [mm]Length [mm]
MT0 9.045 49.8
MT1 12.065 53.5
MT2 17.780 64.0
MT3 23.825 80.5
MT4 31.267 117.5
MT5 44.399 149.5
MT6 63.348 210.0



REDUCTION SLEEVES COMPATIBLE WITH THE Ø13.7 MM DRILL BIT:

✓ MT1 → MT2 — for a spindle with an MT2 socket
✓ MT1 → MT3 — for a spindle with an MT3 socket
✓ MT1 drill drift — for removing the drill bit from the spindle

Cutting data for the Ø13.7 mm drill bit according to ISO 513

Recommended machining conditions for a diameter of Ø13.7 mm

ISO symbolWorkpiece materialVc [m/min]f [mm/rev]n [rpm]Vf [mm/min]
P Steel Structural steel up to 900 N/mm² 11÷20 0.12 256÷465 31÷56
K Cast iron Gray cast iron GG20–GG30 13÷16 0.12 302÷372 36÷45
N Copper and Al alloys Cu, CuZn, Al, and alloys 25÷28 0.16÷0.20 581÷651 93÷130

Checking radial runout

Before drilling with the Ø13.7 mm drill, check radial runout in the spindle — the maximum permissible value is 0.02 mm. Excessive runout reduces hole quality and accelerates cutting edge wear. The taper and spindle socket must be clean and dry.

Material compatibility of the Ø13.7 mm drill bit

Range of workpiece materials and application limitations

✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC

Frequently asked questions about the Ø13.7 mm drill bit

The maximum drilling depth is the flute length l2 = 108 mm minus the drill point length (approximately 4 mm). The effective usable depth is therefore approximately 104 mm.

In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spot drilling with an NC 90° drill is recommended when drilling on milled surfaces, castings with machining allowance, or difficult-to-machine materials.

A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.

Product accessories

Morse drift MK1-2

Reference: 0000012383 In stock > 10 items

€3.95

€4.86 brutto

Reviews

No customer reviews for the moment.

Add a review about the product

Drill 13,7 NWKc HSS DIN 345

Drill 13,7 NWKc HSS DIN 345

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information