Net price: €7.89
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø16.5 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 223 mm |
| Flute length l2 | 125 mm |
| Morse taper | MT2 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø16.5 mm twist drill with an MT2 shank offers a significant advantage over straight-shank drills: mounting stability increases with load. The self-holding Morse taper seats deeper in the spindle in proportion to the cutting torque. At a diameter of 16.5 mm, the Ø16.5 Morse taper drill provides vibration-free operation and uniform cutting edge wear even during intensive use.
The Ø16.5 mm Morse taper drill is chosen for holes for bolted joints in machine components and steel structures. Maintenance departments use it to restore worn holes and drill new ones during assembly. Holes within tolerance class H12 (Ø16.500–Ø16.680 mm); tighter fits are achieved with a reamer.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø16.5 MM DRILL BIT:
| ✓ | MT2 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT2 → MT4 — for a spindle with an MT4 socket |
| ✓ | MT2 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø16.5 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.16 | 212÷386 | 34÷62 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.16 | 251÷309 | 40÷49 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.20÷0.25 | 482÷540 | 96÷135 |
When drilling holes deeper than 49 mm (3ר16.5), periodically retract the drill every 1–1.5×D to remove chips. Use ample emulsion cooling (minimum concentration of 6–8%). Reduce the feed by 30–50% from nominal values.
Range of workpiece materials and application limitations
It depends on the specific bolted joint. For metric coarse-thread bolts, the clearance hole diameter according to ISO 273 is 0.5–1 mm larger than the nominal thread diameter.
Use cooling with a 5–8% emulsion, do not exceed the recommended cutting parameters, and resharpen the tool before it becomes completely dull. Clean taper and spindle socket surfaces reduce runout — the main cause of accelerated wear.
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spotting with a 90° NC spotting drill is recommended when drilling on uneven or inclined surfaces, where the drill may slip away from the marked point.
Reference: 0000006908 In stock > 10 items
€19.42 brutto
Reference: 1181 In stock > 10 items
€19.42 brutto
Reference: 13295 In stock > 10 items
€21.69 brutto
Reference: 4910 In stock > 10 items
€27.51 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.