Net price: €447.37
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø93 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 530 mm |
| Flute length l2 | 280 mm |
| Morse taper | MT6 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø93 mm HSS metal drill bit with an MT6 Morse taper is a tool for the most demanding drilling operations, where the hole diameter requires maximum contact area between the taper and spindle. At 93 mm, the volume of chips removed per centimeter of depth is several times greater than at diameters associated with MT4 tapers. The Ø93 Morse taper drill bit requires pressurized coolant and peck drilling.
The Ø93 Morse taper drill bit is used exclusively in heavy machinery manufacturing — turbine units, rolling mills, presses, and mining machinery. Typical applications include holes in thick plates (>50 mm), housing castings, and load-bearing frame components. Tolerance grade H12 (Ø93.000–Ø93.350 mm); more accurate holes are produced exclusively by boring.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø93 MM DRILL BIT:
| ✓ | MT6 → MT5 — not recommended (socket capacity below the operating load) |
| ✓ | MT6 → MT4 — not recommended (socket significantly undersized for the load) |
| ✓ | MT6 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø93 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.40 | 38÷68 | 15÷27 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.40 | 44÷55 | 18÷22 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.50÷0.63 | 86÷96 | 43÷60 |
At a diameter of 93 mm, drilling without pressurized coolant is not permitted. Minimum coolant system flow rate: 10 l/min, emulsion concentration 8–10%. Lack of cooling leads to cutting-edge overheating, hardening of the material in the cutting zone, and drill breakage.
Range of workpiece materials and application limitations
Yes — an HSSE drill bit with the same dimensions (DIN 345) is a 1:1 replacement. The difference: HSSE with 5% cobalt better withstands the temperatures encountered during prolonged large-diameter drilling. When machining only carbon steels, the difference is small.
Maximum runout of 0.03 mm measured at the drill tip. Clean the taper and socket before each installation. Do not nest reduction sleeves. Replace the drill bit if the taper shows signs of wear or indentation.
At least 7 kW with an MT6 Morse taper spindle and power feed. Radial drilling machines with an arm length of at least 1200 mm. Torque at a diameter of 93 mm in steel exceeds 200 Nm.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.