Net price: €84.21
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø40.5 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 354 mm |
| Flute length l2 | 205 mm |
| Morse taper | MT4 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø40.5 mm twist drill is an industrial NWKc cutting tool designed for drilling large-diameter holes in structural and alloy steels. The MT4 Morse taper shank provides rigid, self-holding mounting in the spindle — without the risk of slipping at maximum cutting torque. The Ø40.5 Morse taper drill is suitable for pillar and box-column drilling machines used in industrial facilities.
The Ø40.5 mm Morse taper drill is used in facilities where large hole diameters are an everyday requirement — manufacturing frames, chassis, machine bodies, and housings. Holes meet H12 tolerance (Ø40.500–Ø40.750 mm); fits for pins require reaming to H7.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø40.5 MM DRILL BIT:
| ✓ | MT4 → MT5 — for a spindle with an MT5 socket |
| ✓ | MT4 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT4 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø40.5 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.25 | 86÷157 | 22÷39 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.25 | 102÷126 | 26÷32 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.32÷0.40 | 196÷220 | 63÷88 |
When drilling holes deeper than 121 mm (3ר40.5), periodically retract the drill every 1–1.5×D to remove chips. Use ample emulsion cooling (minimum concentration of 6–8%). Reduce the feed by 30–50% from nominal values.
Range of workpiece materials and application limitations
Depth greater than 3×D (121 mm): reduce feed by 30–50%, retract every 1×D, and use a 6–8% emulsion at a minimum flow rate of 6 l/min. Peck drilling prevents chips from jamming in the flutes.
1) Clean the taper and spindle socket. 2) Check runout (maximum 0.03 mm). 3) Replace the drill if the taper is damaged or worn. 4) Do not stack reduction sleeves (e.g., MT4→MT3→MT5).
For diameters up to approximately 40 mm, drilling into solid material is possible after spot drilling with an NC 90° drill. Above 40 mm, a Ø20–25 mm pilot hole is recommended to reduce axial force by 40–50% and eliminate vibration from the chisel edge.
Reference: 1186 In stock < 10 items
€45.32 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.