- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Metal drill bit 11.4 NWKc HSS DIN 345
11077
Diameter (mm): 11,4301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€8.09 tax inc.
Net price: €6.58
Description
DIAMETER Ø11.4 mm
MORSE TAPER MT1
OVERALL LENGTH 175 mm
FLUTE LENGTH 94 mm
Technical specifications of the Ø11.4 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø11.4 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 175 mm |
| Flute length l2 | 94 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø11.4 mm HSS metal drill bit – Morse taper MT1
Product description and key benefits
The Ø11.4 mm NWKc metal drill bit is based on DIN 345, which defines both the MT1 taper geometry and the proportions of the flute length to the overall tool length. This standardization ensures full interchangeability — a drill bit from one manufacturer can replace one from another without spindle adjustment or sleeve replacement. With a flute length of 94 mm, the Ø11.4 Morse taper drill bit can drill through holes in typical steel sections used in workshop production.
Key benefits of the Ø11.4 mm metal drill bit
- Self-holding Morse taper — MT1 transmits torque without slippage — essential for prolonged batch drilling
- HSS steel with a hardness of 63–65 HRC — the cutting edge retains its sharpness throughout the tool's service interval between sharpenings
- Flute length 94 mm — the maximum drilling depth allows typical shop sections and sheet metal to be machined in a single pass
- 118° point angle — self-centering in soft steels — eliminates the need for spot drilling on flat surfaces
- Diameter tolerance h8 — repeatable hole size in batch and single-part production
- Cutting edge reconditioning — repeated resharpening extends tool life — at l2 = 94 mm, the resharpening allowance is approximately 11 mm
The Ø11.4 Morse taper drill is used in maintenance departments for repairing and reconditioning machine components. Standard H12 hole tolerance (Ø11.400–Ø11.580 mm) is sufficient for most through holes; close fits are achieved by reaming.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø11.4 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø11.4 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø11.4 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.12 | 307÷558 | 37÷67 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.12 | 363÷447 | 44÷54 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.16÷0.20 | 698÷782 | 112÷156 |
Checking radial runout
Before drilling with the Ø11.4 mm drill, check radial runout in the spindle — the maximum permissible value is 0.02 mm. Excessive runout reduces hole quality and accelerates cutting edge wear. The taper and spindle socket must be clean and dry.
Material compatibility of the Ø11.4 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø11.4 mm drill bit
Yes — using an MT1→MT2 reduction sleeve. The sleeve ensures proper seating of the taper in the larger spindle socket. Use a correctly sized drill drift for removal.
The maximum drilling depth is the flute length l2 = 94 mm minus the drill point length (approximately 3 mm). The effective usable depth is therefore approximately 91 mm.
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spot drilling with an NC 90° drill is recommended when drilling on milled surfaces, castings with machining allowance, or difficult-to-machine materials.
Product accessories
Reduction sleeve MK4 MK1 1751 PTPa DIN 228
Reference: 1179 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK3 MK1 1751 PTPa DIN 228
Reference: 1184 In stock > 10 items
€11.84
€14.57 brutto
Reduction sleeve MK2 MK1 1751 PTPa DIN 228
Reference: 2586 In stock > 10 items
€9.21
€11.33 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.