- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Drill 11,7 NWKc HSS DIN 345
4961
Diameter (mm): 11,7301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€8.09 tax inc.
Net price: €6.58
Description
DIAMETER Ø11.7 mm
MORSE TAPER MT1
OVERALL LENGTH 175 mm
FLUTE LENGTH 94 mm
Technical specifications of the Ø11.7 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø11.7 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 175 mm |
| Flute length l2 | 94 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø11.7 mm HSS metal drill bit – Morse taper MT1
Product description and key benefits
The Ø11.7 mm twist drill with an MT1 taper shank solves the problem of tool slippage in a three-jaw chuck under full load. The Morse taper is self-holding — the higher the cutting torque, the more securely it seats in the spindle. The Ø11.7 Morse taper drill for a diameter of 11.7 mm ensures stability even during prolonged batch drilling at a single workstation.
Key benefits of the Ø11.7 mm metal drill bit
- Direct mounting in an MT1 spindle — eliminates the drill chuck and its associated radial runout
- DIN 345 — ensures full interchangeability with drills from other manufacturers and compatibility with reduction sleeves
- Right-hand helical flutes — efficient chip evacuation from the cutting zone even when drilling holes deeper than 3×D
- Abrasion resistance — high-speed steel (HSS) provides cutting edge durability when machining structural steels with tensile strengths up to 900 N/mm²
- Overall length of 175 mm — compact construction increases system rigidity and reduces vibration during drilling
- Material versatility — drilling steel, cast iron, and aluminum — one tool for most shop tasks
The Ø11.7 Morse taper drill is used in maintenance departments for repairing and reconditioning machine components. Standard H12 hole tolerance (Ø11.700–Ø11.880 mm) is sufficient for most through holes; close fits are achieved by reaming.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø11.7 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø11.7 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø11.7 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.12 | 299÷544 | 36÷65 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.12 | 354÷435 | 42÷52 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.16÷0.20 | 680÷762 | 109÷152 |
Drill sharpening
Sharpen the Ø11.7 mm drill bit on a tool grinder, maintaining the 118° point angle and cutting edge symmetry. Asymmetric sharpening enlarges the hole diameter and loads the spindle unevenly. Each sharpening reduces the flute length by approximately 1–2 mm.
Material compatibility of the Ø11.7 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø11.7 mm drill bit
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spot drilling with an NC 90° drill is recommended when drilling on milled surfaces, castings with machining allowance, or difficult-to-machine materials.
A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.
The Ø11.7 mm NWKc drill bit with an MT1 taper mounts directly in the drill press spindle — the self-holding taper eliminates slipping under high cutting torque. A straight shank drill bit requires a drill chuck, which may not transmit the full torque during heavy use.
Product accessories
Reduction sleeve MK4 MK1 1751 PTPa DIN 228
Reference: 1179 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK3 MK1 1751 PTPa DIN 228
Reference: 1184 In stock > 10 items
€11.84
€14.57 brutto
Reduction sleeve MK5 MK1 1751 PTPa DIN 228
Reference: 1185 In stock > 10 items
€22.37
€27.51 brutto
Reduction sleeve MK2 MK1 1751 PTPa DIN 228
Reference: 2586 In stock > 10 items
€9.21
€11.33 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.