Net price: €27.63
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø24.25 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 281 mm |
| Flute length l2 | 160 mm |
| Morse taper | MT3 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø24.25 mm twist drill with an MT3 taper becomes the only practical choice for stationary drilling machines in the 23–31 mm diameter range. A drill chuck cannot transmit the torque in this diameter range — the risk of slippage and reduced hole quality is too high. The design of the Ø24.25 Morse taper drill with an MT3 taper eliminates these problems.
The Ø24.25 Morse taper drill is used in machinery manufacturing and repair plants for holes in structural components with more demanding dimensional requirements. Typical applications: holes for M22–M30 bolts, seats for bushings and pins. H12 tolerance (Ø24.250–Ø24.460 mm); H7 requires reaming.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø24.25 MM DRILL BIT:
| ✓ | MT3 → MT4 — for a spindle with an MT4 socket |
| ✓ | MT3 → MT5 — for a spindle with an MT5 socket |
| ✓ | MT3 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø24.25 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.20 | 144÷263 | 29÷53 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.20 | 171÷210 | 34÷42 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.25÷0.32 | 328÷368 | 82÷118 |
At a diameter of 24.25 mm, the volume of chips removed is considerable — the helical flutes must evacuate a large amount of material. Use an emulsion at a concentration of 6–8% with a flow rate of at least 5 l/min. Without pressurized coolant, limit the depth of each pass to 48 mm.
Range of workpiece materials and application limitations
An HSSE drill bit contains 5% cobalt, which increases heat resistance from 600°C to 650°C. The practical difference: HSSE performs much better in stainless and difficult-to-machine steels. When machining only carbon steels, the difference in tool life is minimal.
Use peck drilling: retract the drill every 1–1.5×D, clear chips from the flutes, and cool with a 6–8% emulsion. Reduce the feed by 30–50% from the nominal value.
Spot drilling is not necessary on flat surfaces in structural steels. Spotting with a 90° NC spotting drill is recommended when drilling on inclined surfaces, castings with machining allowance, and flame-cut surfaces.
Reference: 1180 In stock > 10 items
€22.66 brutto
Reference: 11965 In stock < 10 items
€45.32 brutto
Reference: 5702 In stock > 10 items
€32.37 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.