Net price: €421.05
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø83 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 519 mm |
| Flute length l2 | 275 mm |
| Morse taper | MT6 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø83 mm metal drill bit is a specialist tool for machining very large-diameter holes on radial drilling machines and boring machines with an MT6 Morse taper spindle. At a diameter of 83 mm, axial force in structural steel exceeds 20 kN, and torque reaches 200 Nm — many times more than typical pillar drilling machines can handle. The Ø83 Morse taper drill bit is used exclusively for industrial machining: heavy machinery manufacturing, shipyards, and valve manufacturing plants.
The Ø83 mm Morse taper drill bit is a tool for plants equipped with heavy machine tools — radial drilling machines, boring machines, and machining centers. Typical applications: holes for bearing bushings, valve seats, and process holes in castings. Tolerance H12 (Ø83.000–Ø83.350 mm).
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø83 MM DRILL BIT:
| ✓ | MT6 → MT5 — not recommended (socket capacity below the operating load) |
| ✓ | MT6 → MT4 — not recommended (socket significantly undersized for the load) |
| ✓ | MT6 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø83 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.40 | 42÷77 | 17÷31 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.40 | 50÷61 | 20÷24 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.50÷0.63 | 96÷107 | 48÷67 |
The Ø83 mm drill bit requires a machine tool with a power rating of at least 7 kW, an MT6 Morse taper spindle, and power feed. Radial drilling machines require an arm length of at least 1200 mm. The workpiece must be rigidly clamped — cutting forces at this diameter can displace an inadequately secured plate.
Range of workpiece materials and application limitations
Pressurized coolant is mandatory: emulsion concentration 8–10%, minimum flow rate 10 l/min. Lack of cooling leads to cutting-edge overheating, hardening of the cutting zone, and tool breakage.
Yes — an HSSE drill bit with the same dimensions (DIN 345) is a 1:1 replacement. The difference: HSSE with 5% cobalt better withstands the temperatures encountered during prolonged large-diameter drilling. When machining only carbon steels, the difference is small.
Maximum runout of 0.03 mm measured at the drill tip. Clean the taper and socket before each installation. Do not nest reduction sleeves. Replace the drill bit if the taper shows signs of wear or indentation.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.