Metric chasers - Fanar

Special high-quality HSS high-speed steel became the basis for producing the best metric button dies available in this category.

Purpose of metric button dies

These round tools are designed for cutting external metric threads. The dies can have from three to six holes - this depends on the size of the tools used. The holes are used to effectively drain the cut material, which significantly affects the effectiveness and efficiency of the work.

There are 87 products.

Sort by:

z 8

Countersink M20 HSS DIN 22 568 Cztool

€22.01 tax inc.

In stock

Instant Shipping

M3 WS - Metric threading dies - Artykuły Techniczne

Countersink M3 WS DIN 22 568

€2.59 tax inc.

In stock

Instant Shipping

Countersink M7 HSS DIN 22 568 Cztool

€7.77 tax inc.

Last items in stock

Instant Shipping

Die M1 HSS DIN 22 568

€11.33 tax inc.

In stock

Instant Shipping

Die M1.2 HSS - Die metric - Artykuły Techniczne

Die M1,2 HSS DIN 22 568

€4.21 tax inc.

In stock

Instant Shipping

Die M1.4 HSS - Die metric - Artykuły Techniczne

Die M1,4 HSS DIN 22 568

€4.21 tax inc.

In stock

Instant Shipping

Die M1.6 HSS - Die metric - Artykuły Techniczne

Die M1,6 HSS DIN 22 568

€5.50 tax inc.

In stock

Instant Shipping

Die M1.7 HSS - Die metric - Artykuły Techniczne

Die M1,7 HSS DIN 22 568

€6.80 tax inc.

Out of stock

Die M1,7 LH HSS DIN 22 568

€6.80 tax inc.

In stock

Instant Shipping

Die M1.8 HSS - Die metric - Artykuły Techniczne

Die M1,8 HSS DIN 22 568

€3.88 tax inc.

In stock

Instant Shipping

Die M10 HSS DIN 22 568

€7.44 tax inc.

In stock

Instant Shipping

Die M10 LH HSS DIN 22 568

€9.06 tax inc.

In stock

Instant Shipping

Showing 1-12 of 87 item(s)

1 2 3 … 8 Next

z 8

Among the most popular tooling dies can be such as M10, M12 tooling dies, as well as M8, M16, M20 tooling dies.

The assortment of metric button dies is intended not only for professional factories, but also for individual customers. Thanks to the good quality of steel, these tools are resistant to damage and can be used for a long time and intensively. Available in a variety of parameters, they are sure to meet the most demanding needs of their users. The aforementioned steel allows the processing of the most difficult and hard materials - metric button dies, presented in this offer will do their job perfectly.

High-quality metric button dies are designed for cutting external threads. Metric dies offered in our store are distinguished by a very high quality of manufacture from modern materials that guarantee long-term use without the risk of rapid damage.
Fanar metric dies can have from three to six holes. Their number depends on the size of the tools used for machining. The holes in question are used for efficient drainage of the cut material. Thread-cutting blades and special chip grooves with the geometry of the hole are placed inside the tooling, where chips of the workpiece material are collected. The geometry of each hole punch is defined by DIN-EN standards. These standards vary depending on the type of thread.
There are also dies in which the chip grooves have an oblique contact surface in order to guide the chips out of the grooves and prevent them from overflowing, which could damage the dies' threads or the threads of the workpiece. Threading dies with such a surface have the designation SPN (from the slanted rake surface).
All dies are designed for cutting external metric ordinary threads. They are dedicated both for manual and machine threading.
All metric dies offered in our store are made entirely of high-quality alloy steel. Thanks to its properties, the dies are extremely hard and durable, and their blades are resistant to mechanical damage even when machining very hard and hard-to-machine materials.

They are very resistant to severe cutting conditions, including high temperatures generated during high-speed machining, as well as to other harsh working conditions. In addition, the properties of alloy steels enable high-performance and highly accurate machining. The subject punching dies are designed for machining parts made of materials marked with the symbol P1.2 - P1.3. These are metals, unalloyed (carbon) steels, metals, nonferrous metals, metal alloys, bronze, thermoset plastics and other hard materials.

What metric dies are made of

The offered Fanar metric button dies are very hard and durable. High speed steel increases the resistance of the dies to possible mechanical damage caused during operation. In tough conditions. The blades of the button dies, even when cutting threads on extremely hard materials, are resistant to breaking, cracking, chipping, breaking out, dulling and other mechanical damage.
The prices of the metric button dies in our offer are perfectly tailored for each pocket, customized made to the highest standards from high-quality alloy steels. Their quality, workmanship and durability will satisfy even the most demanding customers. An additional advantage of our offered threading dies is a very favorable ratio of quality to price.
All metric threading dies included in the offer of our store are dedicated both to individual customers and large locksmith plants engaged in single and multi-series production.

See also our wide offer on machine threaders

Metric chasers - Fanar

Purpose of metric button dies

Countersink M20 HSS DIN 22 568 Cztool

Countersink M3 WS DIN 22 568

Countersink M7 HSS DIN 22 568 Cztool

Die M1 HSS DIN 22 568

Die M1,2 HSS DIN 22 568

Die M1,4 HSS DIN 22 568

Die M1,6 HSS DIN 22 568

Die M1,7 HSS DIN 22 568

Die M1,7 LH HSS DIN 22 568

Die M1,8 HSS DIN 22 568

Die M10 HSS DIN 22 568

Die M10 LH HSS DIN 22 568

What metric dies are made of

Cookie preferences

Store information

Store information