Net price: €565.79
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø100 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 530 mm |
| Flute length l2 | 260 mm |
| Morse taper | MT6 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø100 mm HSS metal drill bit with an MT6 Morse taper is a tool for the most demanding drilling operations, where the hole diameter requires maximum contact area between the taper and spindle. At 100 mm, the volume of chips removed per centimeter of depth is several times greater than at diameters associated with MT4 tapers. The Ø100 Morse taper drill bit requires pressurized coolant and peck drilling.
The Ø100 mm Morse taper drill bit is used in plants equipped with heavy machine tools — radial drilling machines with an arm length of 1200+ mm and boring machines with an MT6 Morse taper spindle. Applications include holes in turbine, rolling mill, and press components. Tolerance grade H12, Ø100.000–Ø100.350 mm.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø100 MM DRILL BIT:
| ✓ | MT6 → MT5 — not recommended (socket capacity below the operating load) |
| ✓ | MT6 → MT4 — not recommended (socket significantly undersized for the load) |
| ✓ | MT6 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø100 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.40 | 35÷64 | 14÷26 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.40 | 41÷51 | 16÷20 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.50÷0.63 | 80÷89 | 40÷56 |
The Ø100 mm drill bit requires a machine tool with a power rating of at least 7 kW, an MT6 Morse taper spindle, and power feed. Radial drilling machines require an arm length of at least 1200 mm. The workpiece must be rigidly clamped — cutting forces at this diameter can displace an inadequately secured plate.
Range of workpiece materials and application limitations
At least 7 kW with an MT6 Morse taper spindle and power feed. Radial drilling machines with an arm length of at least 1200 mm. Torque at a diameter of 100 mm in steel exceeds 200 Nm.
At least two: 1) a Ø25–30 mm pilot hole, 2) the final Ø100 mm drill bit. For diameters above 90 mm, consider three stages: pilot Ø25 → intermediate Ø50 → final Ø100 mm.
Pressurized coolant is mandatory: emulsion concentration 8–10%, minimum flow rate 10 l/min. Lack of cooling leads to cutting-edge overheating, hardening of the cutting zone, and tool breakage.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.