- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Drill 33,75 NWKc HSS DIN 345 Baildon
5328
Diameter (mm): 33,75301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€62.15 tax inc.
Net price: €50.53
Description
DIAMETER Ø33.75 mm
MORSE TAPER MT4
OVERALL LENGTH 339 mm
FLUTE LENGTH 190 mm
Technical specifications of the Ø33.75 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø33.75 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 339 mm |
| Flute length l2 | 190 mm |
| Morse taper | MT4 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø33.75 mm HSS metal drill bit – Morse taper MT4
Product description and key benefits
The Ø33.75 mm metal drill bit with an MT4 Morse taper is used for industrial hole machining where hole position accuracy and dimensions must be repeatable in series production. Direct seating in the spindle eliminates sources of runout — essential at diameters where even slight cutting-edge asymmetry causes oversized holes. The Ø33.75 Morse taper drill bit with an h8 diameter tolerance provides a preliminary hole size ready for further machining.
Key benefits of the Ø33.75 mm metal drill bit
- Secure MT4 taper mounting — the self-holding taper conforming to DIN 345 transmits cutting torque without intermediate components — no drill chuck is required
- HSS steel resistant to temperatures up to 600°C — the cutting edge retains its working hardness at the cutting speeds recommended for structural steels and cast iron
- Flute length 190 mm — enables drilling through holes in components up to 180 mm thick without extensions
- Self-centering 118° geometry — eliminates spot drilling on flat surfaces — saves time in batch production
- Diameter tolerance class h8 — the predrilled hole is ready for reaming to H7 without an additional boring bar pass
- Full interchangeability according to DIN 345 — identical taper dimensions regardless of manufacturer — the drill can be replaced without adjusting the machine
The Ø33.75 Morse taper drill is designed for drilling holes in machine housings, frames, and foundation plates. At MT4 diameters, the tool requires a machine with power feed — manual drilling will not provide uniform pressure. Holes within tolerance class H12, Ø33.750–Ø34.000 mm; tighter fits are achieved by boring.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø33.75 MM DRILL BIT:
| ✓ | MT4 → MT5 — for a spindle with an MT5 socket |
| ✓ | MT4 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT4 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø33.75 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø33.75 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.25 | 104÷189 | 26÷47 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.25 | 123÷151 | 31÷38 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.32÷0.40 | 236÷264 | 76÷106 |
Cooling for large diameters
At a diameter of 33.75 mm, the volume of chips generated per centimeter of depth is approximately 8.9 cm³. Use a 6–8% emulsion at a minimum flow rate of 6 l/min. Without pressurized cooling, limit the depth per pass to 50 mm.
Material compatibility of the Ø33.75 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø33.75 mm drill bit
When drilling S355 steel with a Ø33.75 mm drill, the torque is approximately 84 Nm. This requires a drilling machine with a minimum power rating of 2.0 kW and power spindle feed.
For a drilling machine with an MT5 spindle: MT4→MT5 sleeve. For a smaller MT3 spindle: MT4→MT3 sleeve (check that the operating load does not exceed the socket capacity). For removal: MT4 drill drift.
Depth greater than 3×D (101 mm): reduce feed by 30–50%, retract every 1×D, and use a 6–8% emulsion at a minimum flow rate of 6 l/min. Peck drilling prevents chips from jamming in the flutes.
Product accessories
Reduction sleeve MK6 MK4 1751 PTPa DIN 228
Reference: 1186 In stock < 10 items
€36.84
€45.32 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.