- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Metal drill bit 7.4 NWKc HSS DIN 345 Baildon
0315
Diameter (mm): 7,4301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€5.83 tax inc.
Net price: €4.74
Description
DIAMETER Ø7.4 mm
MORSE TAPER MT1
OVERALL LENGTH 150 mm
FLUTE LENGTH 69 mm
Technical specifications of the Ø7.4 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø7.4 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 150 mm |
| Flute length l2 | 69 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø7.4 mm HSS metal drill bit – Morse taper MT1
Product description and key benefits
The Ø7.4 mm twist drill with an MT1 taper shank solves the problem of tool slippage in a three-jaw chuck under full load. The Morse taper is self-holding — the higher the cutting torque, the more securely it seats in the spindle. The Ø7.4 Morse taper drill for a diameter of 7.4 mm ensures stability even during prolonged batch drilling at a single workstation.
Key benefits of the Ø7.4 mm metal drill bit
- MT1 taper — direct mounting — eliminates the drill chuck as a source of radial runout and tool slippage
- HSS cutting edge, 63–65 HRC — hardness that ensures stable cutting of steels with tensile strengths up to 900 N/mm² throughout the interval between sharpenings
- Right-hand helical flutes — effective chip evacuation from the cutting zone — essential when drilling holes deeper than 2×D
- Compact 150 mm design — shorter tool overhang provides greater rigidity and less vibration
- Repeated reconditioning — the HSS cutting edge can be resharpened 8–12 times while retaining its geometry — at l2 = 69 mm, the resharpening allowance is approximately 8 mm
- Sleeve compatibility — use on drilling machines with MT1 to MT2 spindles using reduction sleeves
The Ø7.4 mm Morse taper drill is used in metalworking shops for bolt and dowel holes in steel components. In batch production, it provides repeatable dimensional accuracy within tolerance class H12 (Ø7.400–Ø7.550 mm). H7 fits require finish reaming.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø7.4 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø7.4 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø7.4 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.08 | 473÷860 | 38÷69 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.08 | 559÷688 | 45÷55 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.10÷0.12 | 1075÷1204 | 108÷144 |
Checking radial runout
Before drilling with the Ø7.4 mm drill, check radial runout in the spindle — the maximum permissible value is 0.02 mm. Excessive runout reduces hole quality and accelerates cutting edge wear. The taper and spindle socket must be clean and dry.
Material compatibility of the Ø7.4 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø7.4 mm drill bit
A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.
The Ø7.4 mm NWKc drill bit with an MT1 taper mounts directly in the drill press spindle — the self-holding taper eliminates slipping under high cutting torque. A straight shank drill bit requires a drill chuck, which may not transmit the full torque during heavy use.
Yes — using an MT1→MT2 reduction sleeve. The sleeve ensures proper seating of the taper in the larger spindle socket. Use a correctly sized drill drift for removal.
Product accessories
Reduction sleeve MK4 MK1 1751 PTPa DIN 228
Reference: 1179 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK3 MK1 1751 PTPa DIN 228
Reference: 1184 In stock > 10 items
€11.84
€14.57 brutto
Reduction sleeve MK5 MK1 1751 PTPa DIN 228
Reference: 1185 In stock > 10 items
€22.37
€27.51 brutto
Reduction sleeve MK2 MK1 1751 PTPa DIN 228
Reference: 2586 In stock > 10 items
€9.21
€11.33 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.