Net price: €5.00
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø7.75 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 156 mm |
| Flute length l2 | 75 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø7.75 mm NWKc twist drill is distinguished by its mounting method — the MT1 Morse taper eliminates the intermediate component between the tool and the spindle. This results in lower radial runout and improved repeatability of hole dimensions. The Ø7.75 Morse taper drill with a high-speed steel (HSS) cutting edge retains its working hardness up to 600°C, allowing drilling without the risk of tempering the cutting edge.
The Ø7.75 mm Morse taper drill is selected for repair and assembly work on pillar drilling machines. The tool allows fast drilling of through and blind holes in steels with tensile strengths up to 900 N/mm². H12 tolerance at Ø7.750–Ø7.900 mm provides dimensional accuracy sufficient for most bolted connections.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø7.75 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø7.75 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.08 | 452÷821 | 36÷66 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.08 | 534÷657 | 43÷53 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.10÷0.12 | 1027÷1150 | 103÷138 |
Before drilling with the Ø7.75 mm drill, check radial runout in the spindle — the maximum permissible value is 0.02 mm. Excessive runout reduces hole quality and accelerates cutting edge wear. The taper and spindle socket must be clean and dry.
Range of workpiece materials and application limitations
The maximum drilling depth is the flute length l2 = 75 mm minus the drill point length (approximately 2 mm). The effective usable depth is therefore approximately 73 mm.
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spot drilling with an NC 90° drill is recommended when drilling on milled surfaces, castings with machining allowance, or difficult-to-machine materials.
A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.
Reference: 1179 In stock > 10 items
€19.42 brutto
Reference: 1184 In stock > 10 items
€14.57 brutto
Reference: 1185 In stock > 10 items
€27.51 brutto
Reference: 2586 In stock < 10 items
€11.33 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.