Net price: €44.74
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø37.5 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 344 mm |
| Flute length l2 | 195 mm |
| Morse taper | MT4 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø37.5 mm twist drill with an MT4 Morse taper is a standard solution for holes in the 32–50 mm diameter range. DIN 345 specifies an MT4 taper for this range, providing a compromise between shank dimensions and operating load. The Ø37.5 Morse taper drill allows drilling into solid material without prior pilot drilling at diameters up to approximately 40 mm.
The Ø37.5 Morse taper drill is chosen for heavy-duty hole machining in machine building, ship repair yards, and valve and fitting factories. Typical applications: holes in end plates, bearing end shields, and drive components. Hole tolerance class H12 (Ø37.500–Ø37.750 mm); tighter fits are achieved by boring.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø37.5 MM DRILL BIT:
| ✓ | MT4 → MT5 — for a spindle with an MT5 socket |
| ✓ | MT4 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT4 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø37.5 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.25 | 93÷170 | 23÷42 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.25 | 110÷136 | 28÷34 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.32÷0.40 | 212÷238 | 68÷95 |
The Ø37.5 mm drill requires a drilling machine with at least 2.2 kW of power and power spindle feed. Stability is difficult to maintain with manual feed — uneven pressure leads to vibration and accelerated cutting edge wear. A box-column or radial drilling machine is recommended.
Range of workpiece materials and application limitations
When drilling S355 steel with a Ø37.5 mm drill, the torque is approximately 93 Nm. This requires a drilling machine with a minimum power rating of 2.2 kW and power spindle feed.
For a drilling machine with an MT5 spindle: MT4→MT5 sleeve. For a smaller MT3 spindle: MT4→MT3 sleeve (check that the operating load does not exceed the socket capacity). For removal: MT4 drill drift.
Depth greater than 3×D (112 mm): reduce feed by 30–50%, retract every 1×D, and use a 6–8% emulsion at a minimum flow rate of 6 l/min. Peck drilling prevents chips from jamming in the flutes.
Reference: 1186 In stock < 10 items
€45.32 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.