- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Metal drill bit 61 NWKc HSS DIN 345
00080
Diameter (mm): 61301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€220.11 tax inc.
Net price: €178.95
Description
DIAMETER Ø61 mm
MORSE TAPER MT5
OVERALL LENGTH 427 mm
FLUTE LENGTH 240 mm
Technical specifications of the Ø61 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø61 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 427 mm |
| Flute length l2 | 240 mm |
| Morse taper | MT5 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø61 mm HSS metal drill bit – Morse taper MT5
Product description and key benefits
The Ø61 mm NWKc twist drill with an MT5 taper falls within a range where every drilling operation requires careful planning — from pilot hole selection and cutting parameters to the cooling system. The MT5 taper is the largest taper used in standard shop drilling machines. With a flute length of 240 mm, the Ø61 Morse taper drill allows drilling in thick plates with a single tool.
Key benefits of the Ø61 mm metal drill bit
- Self-holding taper shank — MT5 transmits full torque to the cutting edges without intermediate components
- HSS with a hardness of 63–65 HRC — stable cutting of materials with tensile strengths up to 900 N/mm² without loss of sharpness
- Overall length of 427 mm — proportional to the drilling diameter — provides a balance between reach and rigidity
- General-purpose 118° geometry — suitable for most materials encountered in shop machining
- Sleeve compatibility — use on drilling machines with MT4 to MT6 spindles using reduction sleeves
- Repeated resharpening — HSS steel allows the cutting edge to be restored without loss of cutting properties
The Ø61 Morse taper drill is used in heavy machinery manufacturing plants, ship repair yards, and industrial valve and fitting factories. Typical applications include holes for mechanical anchors in foundation plates, holes in gearbox bearing end shields, and bores for guide bushings. Hole tolerance class H12 (Ø61.000–Ø61.300 mm); H7 and tighter fits are achieved by boring.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø61 MM DRILL BIT:
| ✓ | MT5 → MT6 — for a spindle with an MT6 socket |
| ✓ | MT5 → MT4 — not recommended (socket capacity below the operating load) |
| ✓ | MT5 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø61 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø61 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.32 | 57÷104 | 18÷33 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.32 | 68÷83 | 22÷27 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.40÷0.50 | 130÷146 | 52÷73 |
Vibration at large diameters
At a diameter of 61 mm, the risk of vibration is increased — the long chisel edge generates an asymmetrical load. A Ø20–25 mm pilot hole eliminates chisel edge engagement. Additionally: check spindle runout (max. 0.03 mm) and secure the workpiece with rigid fixtures.
Material compatibility of the Ø61 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 50%, pilot drilling required)
▲ Aluminum and Al alloys (increased Vc, emulsion cooling)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø61 mm drill bit
H12 tolerance as standard. Reaming or boring is required for H7 or tighter fits — a twist drill cannot achieve these tolerances without finishing.
At least 4 kW of motor power and an MT5 or larger spindle. When drilling S355 steel, torque at the drill reaches 152 Nm — bench and magnetic drilling machines do not provide sufficient rigidity. The optimal machine is a box-column or radial drilling machine with power feed.
Yes — it is required. A Ø20–25 mm pilot hole eliminates cutting by the chisel edge, which at a diameter of 61 mm generates 60–70% of the total axial force and severe vibration.
Product accessories
Reduction sleeve MK6 MK5 1751 PTPa DIN 228
Reference: 1187 In stock < 10 items
€44.74
€55.03 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.