Net price: €42.11
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø30 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 296 mm |
| Flute length l2 | 175 mm |
| Morse taper | MT3 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø30 mm NWKc twist drill with an MT3 taper operates in a diameter range where adequate rigidity of the spindle–tool system is required. At a diameter of 30 mm, the torque generated when cutting structural steel exceeds the capacity of a typical drill chuck — the Morse taper transmits it directly to the spindle. With a flute length of 175 mm, the Ø30 Morse taper drill allows drilling in plates and sections up to 160 mm thick.
The Ø30 mm Morse taper drill is selected for holes for pins, bearing bushings, and flanged connections in machinery manufacturing. It is suitable for machining foundation plates and bearing end shields. H12 tolerance holes (Ø30.000–Ø30.210 mm); tighter fits are achieved by reaming or boring.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø30 MM DRILL BIT:
| ✓ | MT3 → MT4 — for a spindle with an MT4 socket |
| ✓ | MT3 → MT5 — for a spindle with an MT5 socket |
| ✓ | MT3 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø30 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.20 | 117÷212 | 23÷42 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.20 | 138÷170 | 28÷34 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.25÷0.32 | 265÷297 | 66÷95 |
When drilling holes deeper than 90 mm (3ר30), use peck drilling with retraction every 1×D. Use ample emulsion coolant at a minimum concentration of 6–8%. Reduce the feed by 30–50%.
Range of workpiece materials and application limitations
Spot drilling is not necessary on flat surfaces in structural steels. Spotting with a 90° NC spotting drill is recommended when drilling on inclined surfaces, castings with machining allowance, and flame-cut surfaces.
The HSS drill can handle stainless steel with Vc reduced by 40% and ample coolant. For regular INOX machining, an HSSE (cobalt) drill of the same diameter is recommended.
A pillar or box-column drill press with an MT3 spindle and a power rating of at least 1.5 kW. For diameters above 25 mm, power feed is recommended — manual feed will not provide uniform pressure.
Reference: 1180 In stock > 10 items
€22.66 brutto
Reference: 11965 In stock < 10 items
€45.32 brutto
Reference: 5702 In stock > 10 items
€32.37 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.