- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Drill 4.3 NWKc HSS DIN 345 Baildon
4415
Diameter (mm): 4,3301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€5.02 tax inc.
Net price: €4.08
Description
DIAMETER Ø4.3 mm
MORSE TAPER MT1
OVERALL LENGTH 124 mm
FLUTE LENGTH 43 mm
Technical specifications of the Ø4.3 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø4.3 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 124 mm |
| Flute length l2 | 43 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø4.3 mm HSS metal drill bit – Morse taper MT1
Product description and key benefits
The Ø4.3 mm NWKc twist drill with an MT1 taper is designed for precision drilling in structural steels on pillar drilling machines. The Morse taper shank provides secure, self-holding seating in the spindle — eliminating the risk of the tool slipping rotationally under increased cutting torque. With a flute length of 43 mm, the Ø4.3 Morse taper drill allows through holes to be drilled in typical shop sections and sheet metal.
Key benefits of the Ø4.3 mm metal drill bit
- MT1 taper — direct mounting — eliminates the drill chuck as a source of radial runout and tool slippage
- HSS cutting edge, 63–65 HRC — hardness that ensures stable cutting of steels with tensile strengths up to 900 N/mm² throughout the interval between sharpenings
- Right-hand helical flutes — effective chip evacuation from the cutting zone — essential when drilling holes deeper than 2×D
- Compact 124 mm design — shorter tool overhang provides greater rigidity and less vibration
- Repeated reconditioning — the HSS cutting edge can be resharpened 8–12 times while retaining its geometry — at l2 = 43 mm, the resharpening allowance is approximately 5 mm
- Sleeve compatibility — use on drilling machines with MT1 to MT2 spindles using reduction sleeves
The Ø4.3 Morse taper drill is suitable for series production of steel components, where repeatable hole dimensions determine assembly quality. With H12 tolerance at Ø4.300–Ø4.420 mm, holes require no additional machining for bolted connections. More precise fits are achieved with a finishing reamer.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø4.3 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø4.3 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø4.3 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.06 | 814÷1481 | 49÷89 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.06 | 962÷1184 | 58÷71 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.08÷0.10 | 1851÷2073 | 148÷207 |
Coolant for drilling steel
The Ø4.3 mm HSS drill requires cooling with a 5–8% emulsion when drilling structural steels. Dry drilling reduces cutting edge life by 50–70% and reduces hole surface quality. Minimum coolant flow: 2 l/min.
Material compatibility of the Ø4.3 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø4.3 mm drill bit
The Ø4.3 mm NWKc drill bit with an MT1 taper mounts directly in the drill press spindle — the self-holding taper eliminates slipping under high cutting torque. A straight shank drill bit requires a drill chuck, which may not transmit the full torque during heavy use.
Yes — using an MT1→MT2 reduction sleeve. The sleeve ensures proper seating of the taper in the larger spindle socket. Use a correctly sized drill drift for removal.
The maximum drilling depth is the flute length l2 = 43 mm minus the drill point length (approximately 1 mm). The effective usable depth is therefore approximately 42 mm.
Product accessories
Reduction sleeve MK4 MK1 1751 PTPa DIN 228
Reference: 1179 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK3 MK1 1751 PTPa DIN 228
Reference: 1184 In stock > 10 items
€11.84
€14.57 brutto
Reduction sleeve MK5 MK1 1751 PTPa DIN 228
Reference: 1185 In stock > 10 items
€22.37
€27.51 brutto
Reduction sleeve MK2 MK1 1751 PTPa DIN 228
Reference: 2586 In stock > 10 items
€9.21
€11.33 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.