- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Metal drill bit 7.6 NWKc HSS DIN 345 Baildon
0318
Diameter (mm): 7,6301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€5.99 tax inc.
Net price: €4.87
Description
DIAMETER Ø7.6 mm
MORSE TAPER MT1
OVERALL LENGTH 156 mm
FLUTE LENGTH 75 mm
Technical specifications of the Ø7.6 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø7.6 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 156 mm |
| Flute length l2 | 75 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø7.6 mm HSS metal drill bit – Morse taper MT1
Product description and key benefits
The Ø7.6 mm NWKc metal drill bit is based on DIN 345, which defines both the MT1 taper geometry and the proportions of the flute length to the overall tool length. This standardization ensures full interchangeability — a drill bit from one manufacturer can replace one from another without spindle adjustment or sleeve replacement. With a flute length of 75 mm, the Ø7.6 Morse taper drill bit can drill through holes in typical steel sections used in workshop production.
Key benefits of the Ø7.6 mm metal drill bit
- Eliminates the drill chuck — the MT1 taper seated directly in the spindle shortens the torque transmission path and reduces radial tool runout
- Heat resistance up to 600°C — the high-speed steel cutting edge retains its working hardness even at higher cutting speeds in soft and medium-hard steels
- Interchangeability to DIN 345 — identical taper dimensions across manufacturers allow drill replacement without calibrating the spindle axis
- Short design (l1 = 156 mm) — reduced tool overhang provides greater rigidity and a better hole surface finish than extended-length drills
- Holes for locating pins and bushings — the h8 tolerance grade provides a repeatable preliminary size before finish reaming to an H7 fit
- Low operating cost — can be resharpened repeatedly on a tool grinder without losing cutting geometry while maintaining the 118° angle
The Ø7.6 mm Morse taper drill is selected for repair and assembly work on pillar drilling machines. The tool allows fast drilling of through and blind holes in steels with tensile strengths up to 900 N/mm². H12 tolerance at Ø7.600–Ø7.750 mm provides dimensional accuracy sufficient for most bolted connections.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø7.6 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø7.6 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø7.6 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.08 | 461÷838 | 37÷67 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.08 | 544÷670 | 44÷54 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.10÷0.12 | 1047÷1173 | 105÷141 |
Drill sharpening
Sharpen the Ø7.6 mm drill bit on a tool grinder, maintaining the 118° point angle and cutting edge symmetry. Asymmetric sharpening enlarges the hole diameter and loads the spindle unevenly. Each sharpening reduces the flute length by approximately 1–2 mm.
Material compatibility of the Ø7.6 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø7.6 mm drill bit
A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.
The Ø7.6 mm NWKc drill bit with an MT1 taper mounts directly in the drill press spindle — the self-holding taper eliminates slipping under high cutting torque. A straight shank drill bit requires a drill chuck, which may not transmit the full torque during heavy use.
Yes — using an MT1→MT2 reduction sleeve. The sleeve ensures proper seating of the taper in the larger spindle socket. Use a correctly sized drill drift for removal.
Product accessories
HSSE 7.6 cobalt metal drill bit DIN 338
Reference: 0000006335 In stock > 10 items
€2.11
€2.59 brutto
Reduction sleeve MK4 MK1 1751 PTPa DIN 228
Reference: 1179 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK3 MK1 1751 PTPa DIN 228
Reference: 1184 In stock > 10 items
€11.84
€14.57 brutto
Reduction sleeve MK5 MK1 1751 PTPa DIN 228
Reference: 1185 In stock > 10 items
€22.37
€27.51 brutto
Reduction sleeve MK2 MK1 1751 PTPa DIN 228
Reference: 2586 In stock > 10 items
€9.21
€11.33 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.