Net price: €434.21
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø85 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 524 mm |
| Flute length l2 | 280 mm |
| Morse taper | MT6 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø85 mm metal drill bit with an MT6 Morse taper requires experience in selecting cutting parameters and drilling sequences — the 77–100 mm diameter range is the domain of specialists. The operator must provide: a Ø25–30 mm pilot hole, power feed, pressurized coolant, and rigid workpiece clamping. Failure to meet any of these conditions when using the Ø85 Morse taper drill bit risks tool breakage or spindle damage.
The Ø85 mm Morse taper drill bit is a tool for plants equipped with heavy machine tools — radial drilling machines, boring machines, and machining centers. Typical applications: holes for bearing bushings, valve seats, and process holes in castings. Tolerance H12 (Ø85.000–Ø85.350 mm).
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø85 MM DRILL BIT:
| ✓ | MT6 → MT5 — not recommended (socket capacity below the operating load) |
| ✓ | MT6 → MT4 — not recommended (socket significantly undersized for the load) |
| ✓ | MT6 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø85 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.40 | 41÷75 | 16÷30 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.40 | 49÷60 | 20÷24 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.50÷0.63 | 94÷105 | 47÷66 |
The Ø85 mm drill bit requires two- or three-stage drilling: 1) NC spot drilling at 90°, 2) a Ø25–30 mm pilot hole, 3) the final Ø85 mm drill bit. Drilling without a pilot hole generates an axial force above 25 kN and torque exceeding 200 Nm — risk of spindle damage.
Range of workpiece materials and application limitations
Yes — an HSSE drill bit with the same dimensions (DIN 345) is a 1:1 replacement. The difference: HSSE with 5% cobalt better withstands the temperatures encountered during prolonged large-diameter drilling. When machining only carbon steels, the difference is small.
Maximum runout of 0.03 mm measured at the drill tip. Clean the taper and socket before each installation. Do not nest reduction sleeves. Replace the drill bit if the taper shows signs of wear or indentation.
At least 7 kW with an MT6 Morse taper spindle and power feed. Radial drilling machines with an arm length of at least 1200 mm. Torque at a diameter of 85 mm in steel exceeds 200 Nm.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.