- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Drill 8.9 NWKc HSS DIN 345 Baildon
4991
Diameter (mm): 8,9301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€6.47 tax inc.
Net price: €5.26
Description
DIAMETER Ø8.9 mm
MORSE TAPER MT1
OVERALL LENGTH 162 mm
FLUTE LENGTH 81 mm
Technical specifications of the Ø8.9 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø8.9 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 162 mm |
| Flute length l2 | 81 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø8.9 mm HSS metal drill bit – Morse taper MT1
Product description and key benefits
The Ø8.9 mm twist drill with an MT1 taper shank conforming to DIN 345 is a basic tool for any pillar drilling machine. Its cutting geometry with a 118° point angle provides self-centering in soft and medium-hard steels without spot drilling. The Ø8.9 Morse taper drill is used to produce mounting holes, through holes, and holes for tapping in metalworking shops and maintenance departments.
Key benefits of the Ø8.9 mm metal drill bit
- Eliminates the drill chuck — the MT1 taper seated directly in the spindle shortens the torque transmission path and reduces radial tool runout
- Heat resistance up to 600°C — the high-speed steel cutting edge retains its working hardness even at higher cutting speeds in soft and medium-hard steels
- Interchangeability to DIN 345 — identical taper dimensions across manufacturers allow drill replacement without calibrating the spindle axis
- Short design (l1 = 162 mm) — reduced tool overhang provides greater rigidity and a better hole surface finish than extended-length drills
- Holes for locating pins and bushings — the h8 tolerance grade provides a repeatable preliminary size before finish reaming to an H7 fit
- Low operating cost — can be resharpened repeatedly on a tool grinder without losing cutting geometry while maintaining the 118° angle
The Ø8.9 Morse taper drill bit is most often selected for mounting holes in hollow sections, thick plates, and machine components. In toolrooms, it is used to prepare preliminary holes before reaming to a dowel pin fit. Holes are produced to tolerance class H12 (Ø8.900–Ø9.050 mm); if class H7 is required, additional reaming is necessary.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø8.9 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø8.9 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø8.9 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.08 | 393÷715 | 31÷57 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.08 | 465÷572 | 37÷46 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.10÷0.12 | 894÷1001 | 89÷120 |
Drilling blind holes
When drilling blind holes with the Ø8.9 mm drill, allow for the drill point cone — the usable depth is approximately 3 mm less than the set depth. For holes deeper than 26 mm (3×D), retract the drill every 13 mm to clear chips from the flutes.
Material compatibility of the Ø8.9 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø8.9 mm drill bit
The maximum drilling depth is the flute length l2 = 81 mm minus the drill point length (approximately 3 mm). The effective usable depth is therefore approximately 78 mm.
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spot drilling with an NC 90° drill is recommended when drilling on milled surfaces, castings with machining allowance, or difficult-to-machine materials.
A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.
Product accessories
Reduction sleeve MK4 MK1 1751 PTPa DIN 228
Reference: 1179 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK3 MK1 1751 PTPa DIN 228
Reference: 1184 In stock > 10 items
€11.84
€14.57 brutto
Reduction sleeve MK5 MK1 1751 PTPa DIN 228
Reference: 1185 In stock > 10 items
€22.37
€27.51 brutto
Reduction sleeve MK2 MK1 1751 PTPa DIN 228
Reference: 2586 In stock > 10 items
€9.21
€11.33 brutto
HSSE 8.9 cobalt metal drill bit DIN 338
Reference: 0000011287 In stock > 10 items
€3.95
€4.86 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.