- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Metal drill bit 48.5 NWKc HSS DIN 345
0444
Diameter (mm): 48,5301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€113.29 tax inc.
Net price: €92.11
Description
DIAMETER Ø48.5 mm
MORSE TAPER MT4
OVERALL LENGTH 369 mm
FLUTE LENGTH 220 mm
Technical specifications of the Ø48.5 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø48.5 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 369 mm |
| Flute length l2 | 220 mm |
| Morse taper | MT4 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø48.5 mm HSS metal drill bit – Morse taper MT4
Product description and key benefits
The Ø48.5 mm twist drill with an MT4 Morse taper is a standard solution for holes in the 32–50 mm diameter range. DIN 345 specifies an MT4 taper for this range, providing a compromise between shank dimensions and operating load. The Ø48.5 Morse taper drill allows drilling into solid material without prior pilot drilling at diameters up to approximately 40 mm.
Key benefits of the Ø48.5 mm metal drill bit
- Direct mounting in an MT4 spindle — eliminates the drill chuck as a source of runout and slippage
- Flute length 220 mm — drilling through holes in workpieces up to 205 mm thick in a single pass
- DIN 345 — identical taper dimensions regardless of manufacturer — full interchangeability
- Type N right-hand helical flutes — a compromise between web rigidity and flute capacity
- h8 diameter fit — preliminary holes for reaming to H7 without additional boring
- Extended tool life with emulsion cooling — coolant increases cutting edge life by up to a factor of 2.5 compared with dry drilling
The Ø48.5 mm drill bit is used in steel fabrication plants, maintenance departments, and industrial machinery service shops. It is suitable for drilling mounting holes in foundation plates, pipeline flanges, and machine housings. It normally produces holes to tolerance grade H12 (Ø48.500–Ø48.750 mm); holes requiring an H7 fit need additional reaming.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø48.5 MM DRILL BIT:
| ✓ | MT4 → MT5 — for a spindle with an MT5 socket |
| ✓ | MT4 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT4 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø48.5 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø48.5 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.25 | 72÷131 | 18÷33 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.25 | 85÷105 | 21÷26 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.32÷0.40 | 164÷184 | 52÷74 |
Minimum machine tool power
The Ø48.5 mm drill requires a drilling machine with at least 2.2 kW of power and power spindle feed. Stability is difficult to maintain with manual feed — uneven pressure leads to vibration and accelerated cutting edge wear. A box-column or radial drilling machine is recommended.
Material compatibility of the Ø48.5 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø48.5 mm drill bit
When drilling S355 steel with a Ø48.5 mm drill, the torque is approximately 121 Nm. This requires a drilling machine with a minimum power rating of 2.9 kW and power spindle feed.
For a drilling machine with an MT5 spindle: MT4→MT5 sleeve. For a smaller MT3 spindle: MT4→MT3 sleeve (check that the operating load does not exceed the socket capacity). For removal: MT4 drill drift.
Depth greater than 3×D (145 mm): reduce feed by 30–50%, retract every 1×D, and use a 6–8% emulsion at a minimum flow rate of 6 l/min. Peck drilling prevents chips from jamming in the flutes.
Product accessories
Reduction sleeve MK6 MK4 1751 PTPa DIN 228
Reference: 1186 In stock < 10 items
€36.84
€45.32 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.