- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Metal drill bit 15.5 NWKc HSS DIN 345 Baildon
0356
Diameter (mm): 15,5301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€12.30 tax inc.
Net price: €10.00
Description
DIAMETER Ø15.5 mm
MORSE TAPER MT2
OVERALL LENGTH 218 mm
FLUTE LENGTH 120 mm
Technical specifications of the Ø15.5 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø15.5 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 218 mm |
| Flute length l2 | 120 mm |
| Morse taper | MT2 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø15.5 mm HSS metal drill bit – Morse taper MT2
Product description and key benefits
The Ø15.5 mm twist drill with an MT2 taper requires secure mounting in the spindle due to the cutting forces in structural steel. The self-holding Morse taper conforming to DIN 345 meets this requirement. The compact design of the Ø15.5 Morse taper drill reduces overhang and associated vibration.
Key benefits of the Ø15.5 mm metal drill bit
- Secure MT2 taper mounting — the self-holding taper conforming to DIN 345 transmits cutting torque without intermediate components — no drill chuck is required
- HSS steel resistant to temperatures up to 600°C — the cutting edge retains its working hardness at the cutting speeds recommended for structural steels and cast iron
- Flute length 120 mm — enables drilling through holes in components up to 110 mm thick without extensions
- Self-centering 118° geometry — eliminates spot drilling on flat surfaces — saves time in batch production
- Diameter tolerance class h8 — the predrilled hole is ready for reaming to H7 without an additional boring bar pass
- Full interchangeability according to DIN 345 — identical taper dimensions regardless of manufacturer — the drill can be replaced without adjusting the machine
The Ø15.5 mm Morse taper drill is chosen for holes for bolted joints in machine components and steel structures. Maintenance departments use it to restore worn holes and drill new ones during assembly. Holes within tolerance class H12 (Ø15.500–Ø15.680 mm); tighter fits are achieved with a reamer.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø15.5 MM DRILL BIT:
| ✓ | MT2 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT2 → MT4 — for a spindle with an MT4 socket |
| ✓ | MT2 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø15.5 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø15.5 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.16 | 226÷411 | 36÷66 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.16 | 267÷329 | 43÷53 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.20÷0.25 | 513÷575 | 103÷144 |
Deep-hole drilling (over 3×D)
When drilling holes deeper than 46 mm (3×Ø15.5), periodically retract the drill every 1–1.5×D to remove chips. Use ample emulsion cooling (minimum concentration of 6–8%). Reduce the feed by 30–50% from nominal values.
Material compatibility of the Ø15.5 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø15.5 mm drill bit
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spotting with a 90° NC spotting drill is recommended when drilling on uneven or inclined surfaces, where the drill may slip away from the marked point.
The HSS drill can be used for stainless steel with Vc reduced by 40% and ample cooling with a 8–10% emulsion. An HSSE (cobalt) drill of the same diameter is a more efficient option, retaining its hardness up to 650°C.
A pillar or box-column drilling machine with an MT2 spindle and a minimum power rating of 0.75–1.5 kW. Bench drilling machines with a drill chuck are not recommended — they cannot transmit the torque generated at a diameter of 15.5 mm.
Product accessories
15.5 mm HSS DIN 338 fluted metal drill bit
Reference: 0000004464 In stock > 10 items
€4.74
€5.83 brutto
Reduction sleeve MK4 MK2 1751 PTPa DIN 228
Reference: 1181 In stock > 10 items
€15.79
€19.42 brutto
HSSE 15.5 cobalt metal drill bit DIN 338
Reference: 13293 In stock < 10 items
€15.26
€18.77 brutto
Reduction sleeve MK5 MK2 1751 PTPa DIN 228
Reference: 4910 In stock > 10 items
€22.37
€27.51 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.