Net price: €5.26
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø9.2 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 162 mm |
| Flute length l2 | 81 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø9.2 mm twist drill with an MT1 taper shank solves the problem of tool slippage in a three-jaw chuck under full load. The Morse taper is self-holding — the higher the cutting torque, the more securely it seats in the spindle. The Ø9.2 Morse taper drill for a diameter of 9.2 mm ensures stability even during prolonged batch drilling at a single workstation.
The Ø9.2 Morse taper drill is used in maintenance departments for repairing and reconditioning machine components. Standard H12 hole tolerance (Ø9.200–Ø9.350 mm) is sufficient for most through holes; close fits are achieved by reaming.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø9.2 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø9.2 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.08 | 381÷692 | 30÷55 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.08 | 450÷554 | 36÷44 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.10÷0.12 | 865÷969 | 86÷116 |
When drilling blind holes with the Ø9.2 mm drill, allow for the drill point cone — the usable depth is approximately 3 mm less than the set depth. For holes deeper than 27 mm (3×D), retract the drill every 13 mm to clear chips from the flutes.
Range of workpiece materials and application limitations
The maximum drilling depth is the flute length l2 = 81 mm minus the drill point length (approximately 3 mm). The effective usable depth is therefore approximately 78 mm.
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spot drilling with an NC 90° drill is recommended when drilling on milled surfaces, castings with machining allowance, or difficult-to-machine materials.
A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.
Reference: 1179 In stock > 10 items
€19.42 brutto
Reference: 1184 In stock > 10 items
€14.57 brutto
Reference: 1185 In stock > 10 items
€27.51 brutto
Reference: 2586 In stock < 10 items
€11.33 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.