Drill 33,25 NWKc HSS DIN 345 Baildon

Technical data of drill fi 33,25 mm for metal

- diameter d - fi 33.25 mm,

- total length l1- 334,0 mm,

- length of the working part l2 - 185,0 mm,

- morse taper - MK4

Drill 33,25 mm on Morse taper with a fin

Metal drill fi 33,25 mm with Morse taper shank for steel, type NWKc, in accordance with DIN 345, designed for drilling through-holes and blind holes in materials classified as P1.2 - P1.3. These include unalloyed steels, metals, non-ferrous metals, bronze, brass and thermoset plastics. In our store, we offer drills that allow you to drill very accurately and with high efficiency. They have 2 central blades, strong cutting edges and special chip grooves to guide chips up the drilled hole, a tip angle of 118 degrees. The drills in question are manufactured from modern HSS - High Speed Steel distinguished by above-average cutting properties. The 33.25 HSS metal drill bits are resistant to mechanical damage caused by high-speed drilling, during which high temperatures are generated. The drill blades are rarely subject to fractures, cracks, chipping, splintering and other damage. This makes it possible to increase the service life of the drill bits. They are recommended for conventional and numerical control machine tools.