Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Drill 88 NWKc HSS DIN 345
0000010726
Diameter (mm): 88301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€534.08 tax inc.
Net price: €434.21
Description
DIAMETER Ø88 mm
MORSE TAPER MT6
OVERALL LENGTH 524 mm
FLUTE LENGTH 270 mm
Technical specifications of the Ø88 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø88 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 524 mm |
| Flute length l2 | 270 mm |
| Morse taper | MT6 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø88 mm HSS metal drill bit – Morse taper MT6
Product description and key benefits
The Ø88 mm metal drill bit with an MT6 Morse taper is a tool at the upper end of the diameter range — the MT6 taper with a diameter of 63.35 mm is the largest standard size in the Morse taper system. At Ø88, cutting forces require a heavy-duty machine tool: a radial drilling machine or boring machine with a power rating above 7 kW. The Ø88 Morse taper drill bit should not be used without a pilot hole — at this diameter, the chisel edge generates an axial force exceeding 20 kN.
Key benefits of the Ø88 mm metal drill bit
- Direct mounting in an MT6 spindle — eliminates the drill chuck as a source of runout and slippage
- Flute length 270 mm — drilling through holes in workpieces up to 255 mm thick in a single pass
- DIN 345 — identical taper dimensions regardless of manufacturer — full interchangeability
- Type N right-hand helical flutes — a compromise between web rigidity and flute capacity
- h8 diameter fit — preliminary holes for reaming to H7 without additional boring
- Extended tool life with emulsion cooling — coolant increases cutting edge life by up to a factor of 2.5 compared with dry drilling
The Ø88 Morse taper drill bit is used exclusively in heavy machinery manufacturing — turbine units, rolling mills, presses, and mining machinery. Typical applications include holes in thick plates (>50 mm), housing castings, and load-bearing frame components. Tolerance grade H12 (Ø88.000–Ø88.350 mm); more accurate holes are produced exclusively by boring.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø88 MM DRILL BIT:
| ✓ | MT6 → MT5 — not recommended (socket capacity below the operating load) |
| ✓ | MT6 → MT4 — not recommended (socket significantly undersized for the load) |
| ✓ | MT6 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø88 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø88 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.40 | 40÷72 | 16÷29 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.40 | 47÷58 | 19÷23 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.50÷0.63 | 90÷101 | 45÷64 |
Staged drilling — mandatory
The Ø88 mm drill bit requires two- or three-stage drilling: 1) NC spot drilling at 90°, 2) a Ø25–30 mm pilot hole, 3) the final Ø88 mm drill bit. Drilling without a pilot hole generates an axial force above 25 kN and torque exceeding 200 Nm — risk of spindle damage.
Material compatibility of the Ø88 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 50%, pilot drilling required)
▲ Aluminum and Al alloys (increased Vc, emulsion cooling)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø88 mm drill bit
At least 7 kW with an MT6 Morse taper spindle and power feed. Radial drilling machines with an arm length of at least 1200 mm. Torque at a diameter of 88 mm in steel exceeds 200 Nm.
At least two: 1) a Ø25–30 mm pilot hole, 2) the final Ø88 mm drill bit. For diameters above 90 mm, consider three stages: pilot Ø25 → intermediate Ø50 → final Ø88 mm.
Pressurized coolant is mandatory: emulsion concentration 8–10%, minimum flow rate 10 l/min. Lack of cooling leads to cutting-edge overheating, hardening of the cutting zone, and tool breakage.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.