- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Metal drill bit 46 NWKc HSS DIN 345 Baildon
0000004434
Diameter (mm): 46301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€129.47 tax inc.
Net price: €105.26
Description
DIAMETER Ø46 mm
MORSE TAPER MT4
OVERALL LENGTH 364 mm
FLUTE LENGTH 215 mm
Technical specifications of the Ø46 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø46 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 364 mm |
| Flute length l2 | 215 mm |
| Morse taper | MT4 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø46 mm HSS metal drill bit – Morse taper MT4
Product description and key benefits
The Ø46 mm twist drill with an MT4 taper shank conforming to DIN 345 is designed for drilling mounting holes in foundation plates, flanges, and machine housings. At a diameter of 46 mm, the axial force and torque require a stable machine platform — a pillar or box-column drilling machine with power spindle feed. The Ø46 Morse taper drill with a flute length of 215 mm enables drilling through holes in components with thicknesses commonly encountered in machine building.
Key benefits of the Ø46 mm metal drill bit
- Morse taper MT4 — self-holding mounting in the spindle eliminates slipping under full cutting torque
- HSS high-speed steel — the cutting edge retains its working hardness up to 600°C in structural and low-alloy steels
- Full compliance with DIN 345 — ensures interchangeability and compatibility with reduction sleeves and Morse taper spindles
- 118° point angle — versatile cutting geometry performs well in structural and medium-hard steels, cast iron, and aluminum
- Diameter tolerance h8 — repeatable hole size within a tolerance class that ensures consistent parameters in series production
- Resharpenable cutting edges — repeated sharpening on a grinder while maintaining the 118° angle and cutting edge symmetry
The Ø46 Morse taper drill is designed for drilling holes in machine housings, frames, and foundation plates. At MT4 diameters, the tool requires a machine with power feed — manual drilling will not provide uniform pressure. Holes within tolerance class H12, Ø46.000–Ø46.250 mm; tighter fits are achieved by boring.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø46 MM DRILL BIT:
| ✓ | MT4 → MT5 — for a spindle with an MT5 socket |
| ✓ | MT4 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT4 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø46 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø46 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.25 | 76÷138 | 19÷34 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.25 | 90÷111 | 22÷28 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.32÷0.40 | 173÷194 | 55÷78 |
Deep-hole drilling (over 3×D)
When drilling holes deeper than 138 mm (3×Ø46), periodically retract the drill every 1–1.5×D to remove chips. Use ample emulsion cooling (minimum concentration of 6–8%). Reduce the feed by 30–50% from nominal values.
Material compatibility of the Ø46 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø46 mm drill bit
For diameters up to approximately 40 mm, drilling into solid material is possible after spot drilling with an NC 90° drill. Above 40 mm, a Ø20–25 mm pilot hole is recommended to reduce axial force by 40–50% and eliminate vibration from the chisel edge.
When drilling S355 steel with a Ø46 mm drill, the torque is approximately 115 Nm. This requires a drilling machine with a minimum power rating of 2.8 kW and power spindle feed.
For a drilling machine with an MT5 spindle: MT4→MT5 sleeve. For a smaller MT3 spindle: MT4→MT3 sleeve (check that the operating load does not exceed the socket capacity). For removal: MT4 drill drift.
Product accessories
Reduction sleeve MK6 MK4 1751 PTPa DIN 228
Reference: 1186 In stock < 10 items
€36.84
€45.32 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.