• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Drill 13.25 NWKc HSS Zbrojovka
search
  • Drill 13.25 NWKc HSS Zbrojovka
  • Drill 13.25 NWKc HSS Zbrojovka - nr. 1
Artykuły Techniczne

Drill 13.25 NWKc HSS DIN 345 Zbrojovka

€10.03 tax inc.

Net price: €8.16

Instant Shipping
W magazynie: 5 pcs.
W magazynie: 5 pcs.

Instant Shipping

Call and order: (44) 755-04-05

Description

DIAMETER Ø13.25 mm
MORSE TAPER MT1
OVERALL LENGTH 189 mm
FLUTE LENGTH 108 mm

Technical specifications of the Ø13.25 mm drill bit

Twist drill with Morse taper shank

TECHNICAL DATA
Diameter Ø13.25 NWKc HSS
Standard DIN 345
Drill type NWKc — twist drill with taper shank
Material HSS (high-speed steel)
Overall length l1 189 mm
Flute length l2 108 mm
Morse taper MT1
Point angle 118°
Diameter tolerance h8
Cutting direction Right-hand

Ø13.25 mm HSS metal drill bit – Morse taper MT1

Product description and key benefits

The Ø13.25 mm NWKc twist drill with an MT1 taper is designed for precision drilling in structural steels on pillar drilling machines. The Morse taper shank provides secure, self-holding seating in the spindle — eliminating the risk of the tool slipping rotationally under increased cutting torque. With a flute length of 108 mm, the Ø13.25 Morse taper drill allows through holes to be drilled in typical shop sections and sheet metal.

Key benefits of the Ø13.25 mm metal drill bit

  • MT1 taper — direct mounting — eliminates the drill chuck as a source of radial runout and tool slippage
  • HSS cutting edge, 63–65 HRC — hardness that ensures stable cutting of steels with tensile strengths up to 900 N/mm² throughout the interval between sharpenings
  • Right-hand helical flutes — effective chip evacuation from the cutting zone — essential when drilling holes deeper than 2×D
  • Compact 189 mm design — shorter tool overhang provides greater rigidity and less vibration
  • Repeated reconditioning — the HSS cutting edge can be resharpened 8–12 times while retaining its geometry — at l2 = 108 mm, the resharpening allowance is approximately 13 mm
  • Sleeve compatibility — use on drilling machines with MT1 to MT2 spindles using reduction sleeves

The Ø13.25 Morse taper drill bit is most often selected for mounting holes in hollow sections, thick plates, and machine components. In toolrooms, it is used to prepare preliminary holes before reaming to a dowel pin fit. Holes are produced to tolerance class H12 (Ø13.250–Ø13.430 mm); if class H7 is required, additional reaming is necessary.

Morse tapers – dimensions to DIN 228

Dimension table for all Morse tapers MT0–MT6

TaperDiameter D [mm]Length [mm]
MT0 9.045 49.8
MT1 12.065 53.5
MT2 17.780 64.0
MT3 23.825 80.5
MT4 31.267 117.5
MT5 44.399 149.5
MT6 63.348 210.0



REDUCTION SLEEVES COMPATIBLE WITH THE Ø13.25 MM DRILL BIT:

✓ MT1 → MT2 — for a spindle with an MT2 socket
✓ MT1 → MT3 — for a spindle with an MT3 socket
✓ MT1 drill drift — for removing the drill bit from the spindle

Cutting data for the Ø13.25 mm drill bit according to ISO 513

Recommended machining conditions for a diameter of Ø13.25 mm

ISO symbolWorkpiece materialVc [m/min]f [mm/rev]n [rpm]Vf [mm/min]
P Steel Structural steel up to 900 N/mm² 11÷20 0.12 264÷480 32÷58
K Cast iron Gray cast iron GG20–GG30 13÷16 0.12 312÷384 37÷46
N Copper and Al alloys Cu, CuZn, Al, and alloys 25÷28 0.16÷0.20 601÷673 96÷135

Checking radial runout

Before drilling with the Ø13.25 mm drill, check radial runout in the spindle — the maximum permissible value is 0.02 mm. Excessive runout reduces hole quality and accelerates cutting edge wear. The taper and spindle socket must be clean and dry.

Material compatibility of the Ø13.25 mm drill bit

Range of workpiece materials and application limitations

✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC

Frequently asked questions about the Ø13.25 mm drill bit

A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.

The Ø13.25 mm NWKc drill bit with an MT1 taper mounts directly in the drill press spindle — the self-holding taper eliminates slipping under high cutting torque. A straight shank drill bit requires a drill chuck, which may not transmit the full torque during heavy use.

Yes — using an MT1→MT2 reduction sleeve. The sleeve ensures proper seating of the taper in the larger spindle socket. Use a correctly sized drill drift for removal.

Product accessories

Morse drift MK1-2

Reference: 0000012383 In stock > 10 items

€3.95

€4.86 brutto

Reviews

No customer reviews for the moment.

Add a review about the product

Drill 13.25 NWKc HSS DIN 345 Zbrojovka

Drill 13.25 NWKc HSS DIN 345 Zbrojovka

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information