Net price: €236.84
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø65 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 432 mm |
| Flute length l2 | 245 mm |
| Morse taper | MT5 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø65 mm NWKc twist drill with an MT5 taper falls within a range where every drilling operation requires careful planning — from pilot hole selection and cutting parameters to the cooling system. The MT5 taper is the largest taper used in standard shop drilling machines. With a flute length of 245 mm, the Ø65 Morse taper drill allows drilling in thick plates with a single tool.
The Ø65 mm Morse taper drill is used in the production of drive, transmission, and hydraulic cylinder components. Holes for bearing bushings and valve seats require preliminary drilling with a twist drill before boring. H12 tolerance, Ø65.000–Ø65.300 mm.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø65 MM DRILL BIT:
| ✓ | MT5 → MT6 — for a spindle with an MT6 socket |
| ✓ | MT5 → MT4 — not recommended (socket capacity below the operating load) |
| ✓ | MT5 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø65 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.32 | 54÷98 | 17÷31 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.32 | 64÷78 | 20÷25 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.40÷0.50 | 122÷137 | 49÷68 |
The Ø65 mm drill requires a machine with a power rating above 4 kW and an MT5 or larger spindle. Torque when drilling S355 steel reaches 130 Nm — pillar drilling machines rated below 3 kW will not provide stable cutting conditions.
Range of workpiece materials and application limitations
Yes — gray cast iron (GG20–GG30) and ductile cast iron (GGG40) are well suited to HSS drills. Short, brittle chips are easier to evacuate from the flutes than steel chips. Dry drilling with a compressed air blast is possible.
H12 tolerance as standard. Reaming or boring is required for H7 or tighter fits — a twist drill cannot achieve these tolerances without finishing.
At least 4 kW of motor power and an MT5 or larger spindle. When drilling S355 steel, torque at the drill reaches 162 Nm — bench and magnetic drilling machines do not provide sufficient rigidity. The optimal machine is a box-column or radial drilling machine with power feed.
Reference: 1187 In stock < 10 items
€55.03 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.