• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Metal drill bit fi 66 - NWKc HSS - Artykuły Techniczne
search
  • Metal drill bit fi 66 - NWKc HSS - Artykuły Techniczne
  • Metal drill bit fi 66 - NWKc HSS - Artykuły Techniczne - nr. 1
Artykuły Techniczne

Metal drill bit 66 NWKc HSS DIN 345

€265.42 tax inc.

Net price: €215.79

Instant Shipping
W magazynie: 1 pcs.
W magazynie: 1 pcs.

Instant Shipping

Call and order: (44) 755-04-05

Description

DIAMETER Ø66 mm
MORSE TAPER MT5
OVERALL LENGTH 437 mm
FLUTE LENGTH 250 mm

Technical specifications of the Ø66 mm drill bit

Twist drill with Morse taper shank

TECHNICAL DATA
Diameter Ø66 NWKc HSS
Standard DIN 345
Drill type NWKc — twist drill with taper shank
Material HSS (high-speed steel)
Overall length l1 437 mm
Flute length l2 250 mm
Morse taper MT5
Point angle 118°
Diameter tolerance h8
Cutting direction Right-hand

Ø66 mm HSS metal drill bit – Morse taper MT5

Product description and key benefits

The Ø66 mm metal drill bit with an MT5 Morse taper shank to DIN 345 is designed for holes that cannot be made with hole saws because of the required drilling depth. A hole saw works to a depth of 30–50 mm, while the Ø66 twist drill reaches 250 mm. The Ø66 Morse taper drill bit is the only option for drilling into solid material in thick foundation plates and housing castings.

Key benefits of the Ø66 mm metal drill bit

  • Morse taper MT5 — self-holding mounting in the spindle eliminates slipping under full cutting torque
  • HSS high-speed steel — the cutting edge retains its working hardness up to 600°C in structural and low-alloy steels
  • Full compliance with DIN 345 — ensures interchangeability and compatibility with reduction sleeves and Morse taper spindles
  • 118° point angle — versatile cutting geometry performs well in structural and medium-hard steels, cast iron, and aluminum
  • Diameter tolerance h8 — repeatable hole size within a tolerance class that ensures consistent parameters in series production
  • Resharpenable cutting edges — repeated sharpening on a grinder while maintaining the 118° angle and cutting edge symmetry

The Ø66 Morse taper drill is designed for specialized drilling operations in heavy machinery plants and shipyards. For diameters in the MT5 range, every operation requires planning — from the pilot hole to the selection of cutting parameters. H12 tolerance holes, Ø66.000–Ø66.300 mm; fits are achieved by boring.

Morse tapers – dimensions to DIN 228

Dimension table for all Morse tapers MT0–MT6

TaperDiameter D [mm]Length [mm]
MT0 9.045 49.8
MT1 12.065 53.5
MT2 17.780 64.0
MT3 23.825 80.5
MT4 31.267 117.5
MT5 44.399 149.5
MT6 63.348 210.0



REDUCTION SLEEVES COMPATIBLE WITH THE Ø66 MM DRILL BIT:

✓ MT5 → MT6 — for a spindle with an MT6 socket
✓ MT5 → MT4 — not recommended (socket capacity below the operating load)
✓ MT5 drill drift — for removing the drill bit from the spindle

Cutting data for the Ø66 mm drill bit according to ISO 513

Recommended machining conditions for a diameter of Ø66 mm

ISO symbolWorkpiece materialVc [m/min]f [mm/rev]n [rpm]Vf [mm/min]
P Steel Structural steel up to 900 N/mm² 11÷20 0.32 53÷96 17÷31
K Cast iron Gray cast iron GG20–GG30 13÷16 0.32 63÷77 20÷25
N Copper and Al alloys Cu, CuZn, Al, and alloys 25÷28 0.40÷0.50 121÷135 48÷68

Mandatory pilot drilling

The Ø66 mm drill should not be used without a pilot hole. Drill a pilot hole using a Ø20–25 mm drill — this reduces axial force by 40–50% and eliminates engagement of the chisel edge responsible for vibration. At depths greater than 132 mm (2×D), use peck drilling with retraction every 30–40 mm and ample coolant (min. 8% emulsion, 8 l/min).

Material compatibility of the Ø66 mm drill bit

Range of workpiece materials and application limitations

✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 50%, pilot drilling required)
▲ Aluminum and Al alloys (increased Vc, emulsion cooling)
✗ Hardened steels above 45 HRC

Frequently asked questions about the Ø66 mm drill bit

At least 4 kW of motor power and an MT5 or larger spindle. When drilling S355 steel, torque at the drill reaches 165 Nm — bench and magnetic drilling machines do not provide sufficient rigidity. The optimal machine is a box-column or radial drilling machine with power feed.

Yes — it is required. A Ø20–25 mm pilot hole eliminates cutting by the chisel edge, which at a diameter of 66 mm generates 60–70% of the total axial force and severe vibration.

1) Drill a Ø20–25 mm pilot hole. 2) Check runout in the spindle (maximum 0.03 mm). 3) Clamp the workpiece rigidly. 4) Use power feed — manual feed causes uneven pressure and resonance.

Product accessories

Reviews

No customer reviews for the moment.

Add a review about the product

Metal drill bit 66 NWKc HSS DIN 345

Metal drill bit 66 NWKc HSS DIN 345

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information