Net price: €152.63
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø58 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 422 mm |
| Flute length l2 | 235 mm |
| Morse taper | MT5 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø58 mm twist drill with an MT5 Morse taper is a solution for large holes in solid material — where hole saws cannot be used due to the depth or geometry of the component. The flute length of 235 mm allows drilling holes in plates up to 215 mm thick. The Ø58 Morse taper drill requires emulsion cooling at a minimum flow rate of 6 l/min.
The Ø58 Morse taper drill is used in heavy machinery manufacturing plants, ship repair yards, and industrial valve and fitting factories. Typical applications include holes for mechanical anchors in foundation plates, holes in gearbox bearing end shields, and bores for guide bushings. Hole tolerance class H12 (Ø58.000–Ø58.300 mm); H7 and tighter fits are achieved by boring.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø58 MM DRILL BIT:
| ✓ | MT5 → MT6 — for a spindle with an MT6 socket |
| ✓ | MT5 → MT4 — not recommended (socket capacity below the operating load) |
| ✓ | MT5 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø58 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.32 | 60÷110 | 19÷35 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.32 | 71÷88 | 23÷28 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.40÷0.50 | 137÷154 | 55÷77 |
The Ø58 mm drill requires a machine with a power rating above 4 kW and an MT5 or larger spindle. Torque when drilling S355 steel reaches 116 Nm — pillar drilling machines rated below 3 kW will not provide stable cutting conditions.
Range of workpiece materials and application limitations
Yes — it is required. A Ø20–25 mm pilot hole eliminates cutting by the chisel edge, which at a diameter of 58 mm generates 60–70% of the total axial force and severe vibration.
1) Drill a Ø20–25 mm pilot hole. 2) Check runout in the spindle (maximum 0.03 mm). 3) Clamp the workpiece rigidly. 4) Use power feed — manual feed causes uneven pressure and resonance.
Yes — gray cast iron (GG20–GG30) and ductile cast iron (GGG40) are well suited to HSS drills. Short, brittle chips are easier to evacuate from the flutes than steel chips. Dry drilling with a compressed air blast is possible.
Reference: 1187 In stock < 10 items
€55.03 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.