Net price: €4.47
Description
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø5.4 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 133 mm |
| Flute length l2 | 52 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Product description and key benefits
The Ø5.4 mm NWKc twist drill is distinguished by its mounting method — the MT1 Morse taper eliminates the intermediate component between the tool and the spindle. This results in lower radial runout and improved repeatability of hole dimensions. The Ø5.4 Morse taper drill with a high-speed steel (HSS) cutting edge retains its working hardness up to 600°C, allowing drilling without the risk of tempering the cutting edge.
The Ø5.4 Morse taper drill bit is most often selected for mounting holes in hollow sections, thick plates, and machine components. In toolrooms, it is used to prepare preliminary holes before reaming to a dowel pin fit. Holes are produced to tolerance class H12 (Ø5.400–Ø5.520 mm); if class H7 is required, additional reaming is necessary.
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø5.4 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Recommended machining conditions for a diameter of Ø5.4 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.06 | 648÷1179 | 39÷71 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.06 | 766÷943 | 46÷57 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.08÷0.10 | 1474÷1650 | 118÷165 |
When drilling blind holes with the Ø5.4 mm drill, allow for the drill point cone — the usable depth is approximately 2 mm less than the set depth. For holes deeper than 16 mm (3×D), retract the drill every 8 mm to clear chips from the flutes.
Range of workpiece materials and application limitations
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spot drilling with an NC 90° drill is recommended when drilling on milled surfaces, castings with machining allowance, or difficult-to-machine materials.
A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.
The Ø5.4 mm NWKc drill bit with an MT1 taper mounts directly in the drill press spindle — the self-holding taper eliminates slipping under high cutting torque. A straight shank drill bit requires a drill chuck, which may not transmit the full torque during heavy use.
Reference: 1179 In stock > 10 items
€19.42 brutto
Reference: 1184 In stock > 10 items
€14.57 brutto
Reference: 1185 In stock > 10 items
€27.51 brutto
Reference: 2586 In stock < 10 items
€11.33 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.