Machine Tap M14X1.5 ISO 529 D HSSE Fra

Technical data of the machine threader M14x1,5

- nominal diameter d1 - M14x1,5

- thread pitch P - 1,5 mm,

- total length l1 - 95 mm,

- length of the working part l2 - 30 mm,

- diameter of the shank part d2 - 11,2 mm,

- size of the square driver - 9,0 mm,

- diameter of the threaded hole - 12.5 mm

- nut - D (3.5÷5) P

Machine tapping M14x1,5 for stainless steel, straight

Nowoczesny gwintownik maszynowy M14x1,5 nieprzelotowy przelotowy przeznaczony do nacinania gwintów metrycznych drobnozwojnych typ M, o wymiarach 14 x 1,5, zgodny z normą wymiarową DIN 529, o nakroju D. It is a tapping machine with high cutting properties, designed for machining parts made of hard unalloyed steels, alloy steels, metals, stainless steel, acid-resistant steel, heat-resistant steel as well as cast steel and various grades of cast iron. The M14x1.5 machine taps for stainless steel in our offer are dedicated to high-performance machining in severe conditions. They have the advantage of increased resistance to heavy cutting conditions and significantly increased resistance to potential mechanical damage. Our taps are manufactured by the world-famous and respected Serbian company FRA. Its products are distinguished by extended service life and increased resistance to abrasive wear.