• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Drill 13 cobalt NWKc HSSE DIN 345
search
  • Drill 13 cobalt NWKc HSSE DIN 345
  • Drill 13 cobalt NWKc HSSE DIN 345 - nr. 1
Artykuły Techniczne

Drill 13 cobalt NWKc HSSE DIN 345

Artykuły Techniczne Artykuły Techniczne
12506
€16.18 tax inc.

Net price: €13.16

Brak w magazynie
Brak w magazynie

Call and order: (44) 755-04-05

Description

DIAMETER Ø13 mm
MORSE TAPER MT1
OVERALL LENGTH 182 mm
FLUTE LENGTH 101 mm

Technical specifications of the Ø13 mm drill bit

Twist drill with Morse taper shank

TECHNICAL DATA
Diameter Ø13 NWKc HSSE
Standard DIN 345
Drill type NWKc — twist drill with taper shank
Material HSSE (cobalt high-speed steel)
Overall length l1 182 mm
Flute length l2 101 mm
Morse taper MT1
Point angle 118°
Diameter tolerance h8
Cutting direction Right-hand

Ø13 mm HSSE twist drill – MT1 Morse taper

Product description and key benefits

The Ø13 mm twist drill with an MT1 Morse taper is an alternative to straight-shank drills wherever a drill chuck does not provide sufficient clamping rigidity. Direct mounting in the spindle of a pillar drilling machine eliminates the intermediate link — the chuck — which can become a source of runout and slippage during intensive use. The Ø13 Morse taper drill is particularly suitable for metalworking shops and toolrooms, where hole position accuracy matters when fitting pins and bushings.

Key benefits of the Ø13 mm metal drill bit

  • Cobalt 5% — hardness up to 67 HRC — greater hardness than standard HSS (63–65 HRC) translates into longer service life between sharpenings
  • MT1 Morse taper to DIN 345 — secure, self-holding mounting regardless of load level
  • Cutting-edge stability in INOX steels — HSSE does not require as drastic a reduction in Vc as HSS when drilling acid-resistant steels
  • Flute length 101 mm — allows drilling through standard structural component thicknesses
  • Versatility — drilling structural steels, stainless steels, cast iron, and aluminum with one tool
  • 118° angle — self-centering in most materials without spot drilling

The Ø13 mm Morse taper drill is selected for repair and assembly work on pillar drilling machines. The tool allows fast drilling of through and blind holes in steels with tensile strengths up to 900 N/mm². H12 tolerance at Ø13.000–Ø13.180 mm provides dimensional accuracy sufficient for most bolted connections.

Morse tapers – dimensions to DIN 228

Dimension table for all Morse tapers MT0–MT6

TaperDiameter D [mm]Length [mm]
MT0 9.045 49.8
MT1 12.065 53.5
MT2 17.780 64.0
MT3 23.825 80.5
MT4 31.267 117.5
MT5 44.399 149.5
MT6 63.348 210.0



REDUCTION SLEEVES COMPATIBLE WITH THE Ø13 MM DRILL BIT:

✓ MT1 → MT2 — for a spindle with an MT2 socket
✓ MT1 → MT3 — for a spindle with an MT3 socket
✓ MT1 drill drift — for removing the drill bit from the spindle

Cutting data for the Ø13 mm drill bit according to ISO 513

Recommended machining conditions for a diameter of Ø13 mm

ISO symbolWorkpiece materialVc [m/min]f [mm/rev]n [rpm]Vf [mm/min]
P Steel Structural steel up to 900 N/mm² 11÷20 0.12 269÷490 32÷59
K Cast iron Gray cast iron GG20–GG30 13÷16 0.12 318÷392 38÷47
N Copper and Al alloys Cu, CuZn, Al, and alloys 25÷28 0.16÷0.20 612÷686 98÷137

Drilling blind holes

When drilling blind holes with the Ø13 mm drill, allow for the drill point cone — the usable depth is approximately 4 mm less than the set depth. For holes deeper than 39 mm (3×D), retract the drill every 19 mm to clear chips from the flutes.

Material compatibility of the Ø13 mm drill bit

Range of workpiece materials and application limitations

✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 30%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC

Frequently asked questions about the Ø13 mm drill bit

The maximum drilling depth is the flute length l2 = 101 mm minus the drill point length (approximately 4 mm). The effective usable depth is therefore approximately 97 mm.

In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spot drilling with an NC 90° drill is recommended when drilling on milled surfaces, castings with machining allowance, or difficult-to-machine materials.

A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.

Product accessories

Morse drift MK1-2

Reference: 0000012383 In stock > 10 items

€3.95

€4.86 brutto

Reviews

No customer reviews for the moment.

Add a review about the product

Drill 13 cobalt NWKc HSSE DIN 345

Drill 13 cobalt NWKc HSSE DIN 345

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information