- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Drill 18,5 NWKc HSS DIN 345
5640
Diameter (mm): 18,5301 sizes of this drill
33,13,23,33,43,53,63,73,83,944,14,24,34,44,54,64,74,84,955,15,25,35,45,55,65,75,85,966,16,26,36,46,56,66,76,86,977,17,157,27,257,37,47,57,67,77,757,87,988,18,28,258,38,48,58,68,78,88,999,19,29,259,39,49,59,69,79,759,89,91010,110,210,310,410,510,610,710,7510,810,91111,111,211,2511,311,411,511,611,711,811,91212,112,212,312,412,512,612,712,812,91313,113,213,2513,313,413,513,613,713,7513,813,91414,2514,414,514,751515,2515,515,751616,2516,516,751717,2517,517,751818,2518,518,751919,2519,519,752020,2520,520,752121,2521,521,752222,2522,522,752323,2523,523,752424,2524,524,752525,2525,525,752626,2526,526,752727,2527,527,752828,2528,528,752929,2529,529,753030,2530,530,753131,2531,531,753232,2532,532,753333,2533,533,753434,2534,534,753535,2535,535,753636,2536,536,753737,2537,537,7537,83838,538,753939,2539,539,754040,2540,54141,54242,54343,54444,54545,54646,546,75474848,54949,55050,55151,55252,553545556575858,55960616263646566676869707172737475767778798081828384858687888990919293949596979899100
€12.95 tax inc.
Net price: €10.53
Description
DIAMETER Ø18.5 mm
MORSE TAPER MT2
OVERALL LENGTH 233 mm
FLUTE LENGTH 135 mm
Technical specifications of the Ø18.5 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø18.5 NWKc HSS |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSS (high-speed steel) |
| Overall length l1 | 233 mm |
| Flute length l2 | 135 mm |
| Morse taper | MT2 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø18.5 mm HSS metal drill bit – Morse taper MT2
Product description and key benefits
The Ø18.5 mm NWKc twist drill with an MT2 taper is standard equipment for pillar drilling machines in metalworking shops and toolrooms. The 18.5 mm diameter falls within the range where the MT2 taper provides an optimal ratio of contact area to operating load. The Ø18.5 Morse taper drill with type N flute geometry balances efficient chip evacuation with drill web rigidity.
Key benefits of the Ø18.5 mm metal drill bit
- Direct mounting in an MT2 spindle — eliminates the drill chuck as a source of runout and slippage
- Flute length 135 mm — drilling through holes in workpieces up to 120 mm thick in a single pass
- DIN 345 — identical taper dimensions regardless of manufacturer — full interchangeability
- Type N right-hand helical flutes — a compromise between web rigidity and flute capacity
- h8 diameter fit — preliminary holes for reaming to H7 without additional boring
- Extended tool life with emulsion cooling — coolant increases cutting edge life by up to a factor of 2.5 compared with dry drilling
The Ø18.5 Morse taper drill is suitable for drilling holes in hollow sections, medium-thickness sheet metal, and components used in machinery repairs. H12 tolerance (Ø18.500–Ø18.710 mm) is sufficient for assembly holes; if H7 tolerance is required, additional reaming is necessary.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø18.5 MM DRILL BIT:
| ✓ | MT2 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT2 → MT4 — for a spindle with an MT4 socket |
| ✓ | MT2 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø18.5 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø18.5 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.16 | 189÷344 | 30÷55 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.16 | 224÷275 | 36÷44 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.20÷0.25 | 430÷482 | 86÷120 |
Mounting the drill in the spindle
Before mounting the Ø18.5 mm drill, remove chips, oil, and contaminants from the taper and spindle socket. Residue between the contact surfaces causes radial runout and can damage the spindle socket.
Material compatibility of the Ø18.5 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 40%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø18.5 mm drill bit
Use cooling with a 5–8% emulsion, do not exceed the recommended cutting parameters, and resharpen the tool before it becomes completely dull. Clean taper and spindle socket surfaces reduce runout — the main cause of accelerated wear.
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spotting with a 90° NC spotting drill is recommended when drilling on uneven or inclined surfaces, where the drill may slip away from the marked point.
The HSS drill can be used for stainless steel with Vc reduced by 40% and ample cooling with a 8–10% emulsion. An HSSE (cobalt) drill of the same diameter is a more efficient option, retaining its hardness up to 650°C.
Product accessories
Long reduction sleeve MK1-2 PTPb 1762
Reference: 0000006908 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK4 MK2 1751 PTPa DIN 228
Reference: 1181 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK5 MK2 1751 PTPa DIN 228
Reference: 4910 In stock > 10 items
€22.37
€27.51 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.