- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
DIAMETER Ø17 mm
MORSE TAPER MT2
OVERALL LENGTH 223 mm
FLUTE LENGTH 125 mm
Technical specifications of the Ø17 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø17 NWKc HSSE |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSSE (cobalt high-speed steel) |
| Overall length l1 | 223 mm |
| Flute length l2 | 125 mm |
| Morse taper | MT2 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø17 mm HSSE twist drill – MT2 Morse taper
Product description and key benefits
The Ø17 mm NWKc twist drill with an MT2 taper falls within a diameter range where the torque generated during cutting exceeds the capacity of a typical drill chuck. DIN 345 specifies an MT2 taper with a diameter of 17.78 mm for these drill diameters — large enough to transmit the full load without slippage. With a flute length of 125 mm, the Ø17 Morse taper drill allows through drilling in standard steel sections.
Key benefits of the Ø17 mm metal drill bit
- Cobalt 5% — hardness up to 67 HRC — greater hardness than standard HSS (63–65 HRC) translates into longer service life between sharpenings
- MT2 Morse taper to DIN 345 — secure, self-holding mounting regardless of load level
- Cutting-edge stability in INOX steels — HSSE does not require as drastic a reduction in Vc as HSS when drilling acid-resistant steels
- Flute length 125 mm — allows drilling through standard structural component thicknesses
- Versatility — drilling structural steels, stainless steels, cast iron, and aluminum with one tool
- 118° angle — self-centering in most materials without spot drilling
The Ø17 Morse taper drill is designed for drilling holes in steel components of various thicknesses — from thin sheet metal to thick-walled sections. The versatile diameter allows one tool to be used for multiple operations at a single workstation. H12 tolerance holes, Ø17.000–Ø17.180 mm; close fits require reaming.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø17 MM DRILL BIT:
| ✓ | MT2 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT2 → MT4 — for a spindle with an MT4 socket |
| ✓ | MT2 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø17 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø17 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.16 | 206÷374 | 33÷60 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.16 | 243÷300 | 39÷48 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.20÷0.25 | 468÷524 | 94÷131 |
Coolant selection when drilling diameters of 17
At a diameter of 17 mm, the volume of chips removed increases significantly — the helical flutes must evacuate more material per centimeter of depth. Use an emulsion with a concentration of 6–8% at a minimum delivery rate of 3 l/min. Without pressurized cooling, limit the depth of each pass to 51 mm.
Material compatibility of the Ø17 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 30%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø17 mm drill bit
The HSS drill can be used for stainless steel with Vc reduced by 40% and ample cooling with a 8–10% emulsion. An HSSE (cobalt) drill of the same diameter is a more efficient option, retaining its hardness up to 650°C.
A pillar or box-column drilling machine with an MT2 spindle and a minimum power rating of 0.75–1.5 kW. Bench drilling machines with a drill chuck are not recommended — they cannot transmit the torque generated at a diameter of 17 mm.
It depends on the specific bolted joint. For metric coarse-thread bolts, the clearance hole diameter according to ISO 273 is 0.5–1 mm larger than the nominal thread diameter.
Product accessories
Long reduction sleeve MK1-2 PTPb 1762
Reference: 0000006908 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK4 MK2 1751 PTPa DIN 228
Reference: 1181 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK5 MK2 1751 PTPa DIN 228
Reference: 4910 In stock > 10 items
€22.37
€27.51 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.