- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
DIAMETER Ø15 mm
MORSE TAPER MT2
OVERALL LENGTH 212 mm
FLUTE LENGTH 114 mm
Technical specifications of the Ø15 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø15 NWKc HSSE |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSSE (cobalt high-speed steel) |
| Overall length l1 | 212 mm |
| Flute length l2 | 114 mm |
| Morse taper | MT2 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø15 mm HSSE twist drill – MT2 Morse taper
Product description and key benefits
The Ø15 mm twist drill with an MT2 taper requires secure mounting in the spindle due to the cutting forces in structural steel. The self-holding Morse taper conforming to DIN 345 meets this requirement. The compact design of the Ø15 Morse taper drill reduces overhang and associated vibration.
Key benefits of the Ø15 mm metal drill bit
- HSSE steel with 5% cobalt — heat resistance up to 650°C allows drilling in 304/316 stainless steels without rapid dulling of the cutting edge
- Morse taper MT2 — self-holding mounting in the spindle eliminates slippage at the high cutting torques generated in difficult-to-machine steels
- Increased hot hardness — cobalt in the steel matrix increases resistance to tempering — essential at low Vc and the high cutting resistance of austenitic steels
- DIN 345 — full interchangeability with HSS drills of the same size and compatibility with reduction sleeves
- Flute length 114 mm — drilling through holes in components up to 99 mm thick
- Machining INOX steel without coatings — HSSE geometry and composition allow drilling in acid-resistant steels without TiN/TiAlN coatings
The Ø15 Morse taper drill is suitable for drilling holes in hollow sections, medium-thickness sheet metal, and components used in machinery repairs. H12 tolerance (Ø15.000–Ø15.180 mm) is sufficient for assembly holes; if H7 tolerance is required, additional reaming is necessary.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø15 MM DRILL BIT:
| ✓ | MT2 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT2 → MT4 — for a spindle with an MT4 socket |
| ✓ | MT2 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø15 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø15 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.16 | 233÷424 | 37÷68 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.16 | 276÷340 | 44÷54 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.20÷0.25 | 531÷594 | 106÷148 |
Coolant selection when drilling diameters of 15
At a diameter of 15 mm, the volume of chips removed increases significantly — the helical flutes must evacuate more material per centimeter of depth. Use an emulsion with a concentration of 6–8% at a minimum delivery rate of 3 l/min. Without pressurized cooling, limit the depth of each pass to 45 mm.
Material compatibility of the Ø15 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 30%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø15 mm drill bit
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spotting with a 90° NC spotting drill is recommended when drilling on uneven or inclined surfaces, where the drill may slip away from the marked point.
The HSS drill can be used for stainless steel with Vc reduced by 40% and ample cooling with a 8–10% emulsion. An HSSE (cobalt) drill of the same diameter is a more efficient option, retaining its hardness up to 650°C.
A pillar or box-column drilling machine with an MT2 spindle and a minimum power rating of 0.75–1.5 kW. Bench drilling machines with a drill chuck are not recommended — they cannot transmit the torque generated at a diameter of 15 mm.
Product accessories
Reduction sleeve MK4 MK2 1751 PTPa DIN 228
Reference: 1181 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK5 MK2 1751 PTPa DIN 228
Reference: 4910 In stock > 10 items
€22.37
€27.51 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.