Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Die M16X1.75 HSS DIN 22 568 Cztool
273228
Thread size: M16x1,75188 sizes of this die
M1x0,2M2x0,25M3x0,25M3x0,35M4x0,5M4x0,6M4,5x0,5M5x0,5M5x0,75M5,5x0,5M6x0,5M6x0,75M7x0,5M7x0,75M8x0,5M8x0,75M8x1M9x0,5M9x0,75M9x1M10x0,5M10x0,75M10x1M10x1,25M11x0,5M11x0,75M11x1M11x1,25M12x0,5M12x0,75M12x1M12x1,25M12x1,5M13x1M13x1,25M14x0,75M14x1M14x1,25M14x1,5M15x1M15x1,25M15x1,5M16x0,75M16x1M16x1,25M16x1,5M16x1,75M17x0,75M17x1M17x1,5M18x0,5M18x0,75M18x1M18x1,25M18x1,5M18x2M19x1M19x1,5M20x0,75M20x1M20x1,25M20x1,5M20x2M21x1,5M22x0,75M22x1M22x1,25M22x1,5M22x1,75M22x2M23x0,75M23x1,5M24x1M24x1,25M24x1,5M24x2M24x2,5M25x1M25x1,5M25x2M26x1M26x1,5M26x2M26x2,5M27x1M27x1,5M27x2M28x1M28x1,5M28x2M29x1,5M30x1M30x1,5M30x2M30x2,5M30x3M32x1M32x1,5M32x2M32x3M33x1M33x1,5M33x2M33x3M34x1,5M34x2M34x3M35x1,5M35x3M36x1M36x1,5M36x2M36x3M37x2M38x1,5M38x2M39x1M39x1,5M39x2M39x3M40x1M40x1,5M40x2M40x3M41x1M42x1,5M42x2M42x3M42x4M43x1M43x1,5M43x2M45x1,5M45x2M45x3M45x4M46x2M48x1M48x1,5M48x2M48x3M48x4M50x1M50x1,5M50x2M50x3M51x1M52x1,5M52x2M52x3M52x4M55x1,5M56x1,5M56x2M56x3M56x4M60x1,5M60x2M60x3M62x2M63x1,5M64x1,5M64x2M64x3M64x4M65x2M68x1,5M68x2M70x1,5M70x2M72x1,5M72x4M75x1,5M75x2M76x1,5M76x4M78x2M80x1,5M80x2M82x1,5M83x2M85x2M85x3M86x2M90x2M100x1,5M125x2M145x2
€131.09 tax inc.
Net price: €106.58
Description
Technical data for the M16x1.75 die
| Technical data | |
|---|---|
| Thread size D1 | M16x1.75 |
| Thread Pitch P | 1.75 mm |
| Outside Diameter D2 | 45 mm |
| Thickness H1 | 14 mm |
| Number of Chip Holes | 5 |
| Required Shaft Diameter | 15.82 mm |
Die M16x1.75 HSS DIN 22 568 – tool for precision threads of small diameter
The M16x1.75 die is a professional round tool made of high-speed steel (HSS) with a hardness of 64 HRC, designed for cutting external metric threads with a diameter of 16 mm and a pitch of 1.75 mm. This unusual thread pitch is used in specialized industrial applications requiring specific characteristics of the threaded joint. A design compliant with DIN 22 568 and a tolerance class of 6g ensure correct mating with 6H nuts in typical industrial applications. This tool is ideal for machine shops and maintenance departments serving the machinery and automotive industries.
Why choose the M16x1.75 die
- Pitch of 1.75 mm for specialized applications – an unusual pitch providing a specific balance between thread-cutting speed and mechanical strength in specialized applications
- Diameter of 16 mm for general-purpose applications – a common size in mechanical engineering, machinery, and assemblies requiring threaded joints of small diameter
- High-speed steel HSS 64 HRC – provides long service life when cutting threads in structural steels up to 800 MPa, aluminum, and brass
- 6g tolerance according to ISO – standard accuracy grade with controlled clearance allows easy nut installation without binding
- Solid round construction – non-segmented construction eliminates dimensional errors and ensures repeatability in series production
The M16x1.75 die is a tool for machine shops, maintenance departments, and manufacturing plants serving the machinery and automotive industries. It is ideal for cutting threads on rods, pins, and shafts in small and medium-sized machinery and equipment. Use with threading lubricants is recommended to reduce resistance, improve surface finish, and extend tool life during intensive use.
Frequently asked questions
Chamfer the end of the rod (diameter 15.7-15.75 mm) at approximately 45° and clamp it securely in a vise. Position the die perpendicular to the axis and follow this cycle: two full turns in the cutting direction, then back off half a turn to remove chips. With a pitch of 1.75 mm, check squareness regularly and apply suitable lubrication every 3-4 turns.
For structural steels, use threading oils or standard machine oil, applied before starting and every 3-4 turns during operation. For aluminum, use kerosene with added oil; for brass, machine oil is sufficient. Lubrication reduces resistance by approximately 40 percent and extends tool life at a diameter of 16 mm.
Binding often results from infrequent backing off or a lack of lubricant. Stop the operation immediately, unscrew the die completely, and clean the flutes with a brush or compressed air. Check the rod diameter with a micrometer – tolerances matter at a pitch of 1.75 mm. Resume with more generous lubrication and more frequent backing off – every 1.5-2 turns instead of every 2-3.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.