Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Die M52X2 HSS DIN 22 568 Cztool
447424
Thread size: M52x2188 sizes of this die
M1x0,2M2x0,25M3x0,25M3x0,35M4x0,5M4x0,6M4,5x0,5M5x0,5M5x0,75M5,5x0,5M6x0,5M6x0,75M7x0,5M7x0,75M8x0,5M8x0,75M8x1M9x0,5M9x0,75M9x1M10x0,5M10x0,75M10x1M10x1,25M11x0,5M11x0,75M11x1M11x1,25M12x0,5M12x0,75M12x1M12x1,25M12x1,5M13x1M13x1,25M14x0,75M14x1M14x1,25M14x1,5M15x1M15x1,25M15x1,5M16x0,75M16x1M16x1,25M16x1,5M16x1,75M17x0,75M17x1M17x1,5M18x0,5M18x0,75M18x1M18x1,25M18x1,5M18x2M19x1M19x1,5M20x0,75M20x1M20x1,25M20x1,5M20x2M21x1,5M22x0,75M22x1M22x1,25M22x1,5M22x1,75M22x2M23x0,75M23x1,5M24x1M24x1,25M24x1,5M24x2M24x2,5M25x1M25x1,5M25x2M26x1M26x1,5M26x2M26x2,5M27x1M27x1,5M27x2M28x1M28x1,5M28x2M29x1,5M30x1M30x1,5M30x2M30x2,5M30x3M32x1M32x1,5M32x2M32x3M33x1M33x1,5M33x2M33x3M34x1,5M34x2M34x3M35x1,5M35x3M36x1M36x1,5M36x2M36x3M37x2M38x1,5M38x2M39x1M39x1,5M39x2M39x3M40x1M40x1,5M40x2M40x3M41x1M42x1,5M42x2M42x3M42x4M43x1M43x1,5M43x2M45x1,5M45x2M45x3M45x4M46x2M48x1M48x1,5M48x2M48x3M48x4M50x1M50x1,5M50x2M50x3M51x1M52x1,5M52x2M52x3M52x4M55x1,5M56x1,5M56x2M56x3M56x4M60x1,5M60x2M60x3M62x2M63x1,5M64x1,5M64x2M64x3M64x4M65x2M68x1,5M68x2M70x1,5M70x2M72x1,5M72x4M75x1,5M75x2M76x1,5M76x4M78x2M80x1,5M80x2M82x1,5M83x2M85x2M85x3M86x2M90x2M100x1,5M125x2M145x2
€103.58 tax inc.
Net price: €84.21
Description
Technical data for the M52x2 die
| Technical data | |
|---|---|
| Thread size D1 | M52x2 |
| Thread Pitch P | 2 mm |
| Outside Diameter D2 | 90 mm |
| Thickness H1 | 22 mm |
| Number of Chip Holes | 8 |
| Required Shaft Diameter | 51.82 mm |
Die M52x2 HSS DIN 22 568 – a threading tool for medium-to-large structures
The professional M52x2 round die, made of high-speed steel (HSS) with a hardness of 64 HRC, provides precise cutting of external metric threads with a diameter of 52 mm and a standard pitch of 2 mm. This tool combines medium-to-large dimensions with a conventional pitch, making it a versatile solution for workshops servicing industrial structures, construction machinery, and medium-to-large hydraulic equipment. Compliance with DIN 22 568 and a 6g tolerance guarantee proper mating with 6H nuts in typical industrial applications. The diameter of 52 mm places the tool in the category of medium-to-large components widely used in the machinery industry.
Key advantages of the M52x2 HSS die
- Diameter of 52 mm for industrial structures – a size commonly found in industrial transmissions, hydraulic cylinders, and structural rods in medium-sized and large machinery
- Conventional pitch of 2 mm – versatile pitch providing an optimal balance between cutting speed and strength for most structural applications
- HSS steel hardness of 64 HRC – the tool material offers high wear resistance during prolonged operation in steels up to 800 MPa
- 6g/6H fit – standard tolerance class with normal clearance allows repeated assembly and disassembly without excessive wear
- Solid round design – the one-piece design provides the structural rigidity needed for threading medium-to-large diameters
The M52x2 die is a practical tool for industrial workshops, maintenance departments, and manufacturing plants serving the machinery, construction, and hydraulics industries. It is particularly suitable for cutting threads on gearbox shafts, cylinder piston rods, structural rods, and fastening components in medium-to-large machinery. Use with cooling and lubricating fluids and holders of adequate rigidity is recommended.
Frequently asked questions
Chamfer the end of the rod (diameter 51.5-51.6 mm) at approximately 45° and clamp it very securely to eliminate vibration. Keep the die strictly perpendicular, making two full turns in the cutting direction, then reverse half a turn to break the chips. For a diameter of 52 mm, use a die stock with handles at least 500 mm long.
Use threading oils or cooling and lubricating emulsions, applied generously before starting and every 3-4 turns during operation. A diameter of 52 mm generates substantial cutting forces – intensive lubrication is required to reduce resistance and temperature. Standard machine oil is sufficient for structural steels.
Jamming at a diameter of 52 mm can be dangerous. Stop the process immediately, unscrew the die completely, and clean the flutes with a brass brush or compressed air. Use a micrometer to check that the rod diameter is correct. Resume with more generous lubrication and more frequent reversing – every 1.5 turn instead of every 2.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.