Die M39X2 HSS DIN 22 568

- notched thread d1 - M39x2,

- thread pitch P - 2 mm,

- external diameter d2 - 75 mm,

- thickness h1 - 20 mm,

- number of chip holes - 7,

- required diameter of the shaft - 38,82 mm.

Die M39x2 for manual and machine threading

Die M39x2 HSS for threading, fine machine round, multi-cutting tool designed for cutting external threads. This is a M39x2 uniform threading machine, which means that it makes a thread in one pass, after less than 2 turns, or more precisely 1.75 P, a full thread in 6g tolerance is already made. The working principle of die is to screw it on (like a nut on a bolt) during which the blades die cut the thread. The tool is made of high-grade SW7M high-speed steel from the HSS family. It is possible to use die both in manual and machine processing. An important issue when making threads by hand is the use of toolholders for threading dies, thanks to which the proper execution of the thread is ensured and damage can be avoided die. Construction of the threading dies. Die have chip holes that are designed to drain the cut material, depending on the size die there can be usually from 3-6 holes. In the working part die there are cutting parts (exist on both parts of the working part) and a guiding part located in the center of the working part.