Net price: €347.37
Description
| Technical data | |
|---|---|
| Thread size D1 | M72x4 left-hand |
| Thread Pitch P | 4 mm |
| Outside Diameter D2 | 120 mm |
| Thickness H1 | 36 mm |
| Number of Chip Holes | 8 |
| Required Shaft Diameter | 71.60 mm |

The M72x4 left-hand die is a specialized round tool made of high-speed steel (HSS) with a hardness of 64 HRC, combining a large diameter of 72 mm with a left-hand thread with a coarse pitch of 4 mm. A left-hand thread is cut in the direction opposite to the standard direction, preventing self-loosening in large rotating machinery where components rotate clockwise during operation. The coarse pitch of 4 mm also enables very fast thread cutting while maintaining sufficient mechanical strength. Compliance with DIN 22 568 and the 6g tolerance ensure proper mating with 6H left-hand nuts. This tool is intended for specialized workshops servicing the largest machinery and rotating equipment requiring left-hand threads at very large diameters.
The M72x4 left-hand die is a solution for the most specialized workshops servicing the largest rotating machines, large industrial gearboxes, very large grinding machines, and equipment where the direction of rotation requires a left-hand thread at very large diameters, while a coarse pitch ensures maximum process efficiency. Due to the extreme combination (left-hand + coarse pitch + large diameter), threading requires a mechanical drive, highly rigid industrial holders, and highly qualified operators experienced in large-diameter left-hand threads.
The tool is designed for cutting left-hand threads on very large spindles, gearbox drive shafts, and heavy machinery components that rotate clockwise. Combining the left-hand direction with a pitch of 4 mm instead of the standard 6 mm ensures enhanced resistance to loosening under substantial loads.
The M72x4 left-hand version has the opposite thread direction and a pitch of 4 mm instead of the standard 6 mm. This difference in pitch by a factor of one and a half, together with the left-hand direction, increases the thread contact area and provides greater joint stability in large structural components.
Rotate the tool counterclockwise, using a dedicated lubricant. After each turn, back the die off clockwise by half a turn to remove chips. Due to the very substantial diameter, clamping the rod in a swivel vise or using an end support is recommended.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.