Net price: €9.21
Description
| Technical data | |
|---|---|
| Thread size D1 | M9x1 left-hand |
| Thread Pitch P | 1 mm |
| Outside Diameter D2 | 25 mm |
| Thickness H1 | 9 mm |
| Number of Chip Holes | 4 |
| Required Shaft Diameter | 8.88 mm |

The M9x1 left-hand die is a specialized round tool made of high-speed steel (HSS) with a hardness of 64 HRC, combining a small diameter of 9 mm with a left-hand thread with a pitch of 1 mm. A left-hand thread is cut in the direction opposite to the standard thread – tightening is counterclockwise, which prevents components from unscrewing on their own in rotating equipment. Compliance with DIN 22 568 and a tolerance class of 6g ensure a proper fit with left-hand 6H nuts. This tool is used in precision engineering, electronics, and equipment where a component rotates clockwise during operation and requires protection against loosening.
The M9x1 left-hand die is a tool for specialized workshops involved in precision engineering, electronic equipment repairs, and instrument manufacturing. It is particularly useful for cutting left-hand threads on miniature studs, rotating pins, and components where the direction of rotation requires a left-hand thread. Due to the small dimensions and left-hand thread, cutting requires particular care and a highly qualified operator.
Chamfer the end of the rod (diameter 8.9-8.95 mm) at 45°. Position the die perpendicular to the rod and turn it counterclockwise (to the left) for two turns, then reverse half a turn clockwise to break the chips. With a small diameter, take particular care to avoid damaging the delicate cutting edges.
For miniature threads, use precision machine oils or lubricants for precision mechanisms. Apply a very thin layer of lubricant before starting – excess lubricant can make it difficult to check perpendicular alignment. Kerosene with a drop of oil works well for aluminum, while a light threading oil is suitable for steel.
Chips can easily become entangled when cutting miniature left-hand threads. If the die binds, stop cutting immediately and turn it clockwise (the removal direction for a left-hand thread). Clean the flutes with a soft brush and check the rod diameter. Resume with more frequent reversing – every 1 turn instead of every 2.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.