Net price: €7.37
Description
| Technical data | |
|---|---|
| Thread size D1 | M11x1 left-hand |
| Thread Pitch P | 1 mm |
| Outside Diameter D2 | 30 mm |
| Thickness H1 | 11 mm |
| Number of Chip Holes | 4 |
| Required Shaft Diameter | 10.88 mm |

The M11x1 left-hand die is a specialized round tool made of high-speed steel (HSS) with a hardness of 64 HRC, combining a small diameter of 11 mm with a left-hand metric fine thread with a pitch of 1 mm. A left-hand thread is cut in the direction opposite to the standard direction, preventing self-unscrewing in rotating equipment, while the fine pitch further increases vibration resistance. Compliance with DIN 22 568 and a tolerance class of 6g ensure proper fit with 6H left-hand nuts. The HSS 800 designation indicates a material intended for machining steels with a tensile strength Rm of up to 800 MPa. This tool is used in precision mechanisms, rotating equipment, and wherever small components rotate clockwise during operation and require maximum protection against loosening.
The M11x1 left-hand die is a tool for machine shops specializing in small rotating equipment, power tools, and precision mechanisms requiring a left-hand thread with the additional properties of a metric fine thread. It is particularly useful for cutting threads on small shafts, pins, and studs where a standard right-hand thread could unscrew during operation. Due to the combination (left-hand + fine pitch + small diameter), the process requires increased operator attention, precise clamping, and careful lubrication.
Prepare a rod (diameter 10.85-10.9 mm) with a chamfer. Clamp it securely and position the die perpendicular. Rotate counterclockwise (to the left), making two turns forward, then reverse half a turn clockwise to remove chips. When cutting a small-diameter left-hand metric fine thread, pay particular attention to perpendicularity and lubricate every 2-3 turns.
For steels up to 800 MPa, use threading oils applied before starting and replenished every 3 turns. A small-diameter left-hand metric fine thread requires the same intensive lubrication as a right-hand thread – the direction does not affect the requirements; pitch and material determine them. At small diameters, avoid excess lubricant that makes inspection difficult.
Remember that backing off a left-hand thread requires clockwise rotation. Immediately turn clockwise (to the right) to withdraw the die. Clean the flutes with a brush and check the rod diameter with a micrometer (tolerances are critical at small diameters). Resume with generous lubrication and more frequent backing off – for a small-diameter left-hand metric fine thread, every 1.5 turn instead of every 2.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.