Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of the M22x2 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M22 |
| Thread pitch P mm | 2 mm |
| Overall length l1 | 113 mm |
| Length of working part l2 | 33 mm |
| Diameter of shank part d2 | 16 mm |
| Size of square drive a | 12,5 mm |
| Threaded bore diameter | 20 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M22x2 fine thread hand taps
Hand Tap M22X2 ISO 529/2 6H HSS is dedicated to the manual cutting of fine-twist metric threads in steel and cast iron; in workshop applications, hand Tap M22x2 maintains a 60-degree profile and a predictable 6H grade hole fit.
Design data and material: size M22, pitch P=2; right-hand direction; HSS high speed steel, ground design; straight grooves for even chip evacuation; cylindrical shank with square driver; 20.00 mm drill bit recommended, which supports proper profile filling and axial guidance in manual mode.
- Compatible fits - The 6Hhole interacts with 6g threads, maintaining nominal clearance and a clean joint outline.
- Stable take-off - The steppedoverlay balances cutting forces and reduces the risk of input recalibration.
- Durability and finish - Ground blades and straight grooves reduce burrs and promote low roughness.
- Efficiency of stages - Set Taps hand-held M22x2 speeds up reaching the full profile without compromising alignment.
Standardization basis: ISO 529/2 (dimensions and design of hand taps); ISO 68-1 (60-degree metric outline); ISO 261/262 (ranks and pitches); ISO 965 - Class 6H for internal threads. The set of M22x2 ISO 529/2 6H HSS taps guarantees repeatable coil geometry, nominal clearance of 6g/6H and stable results in precision assembly and unit machining.
M22x2 thread cutting stages in 2-piece set: ripper and finisher
Frequently asked questions
1. What does set Taps of M22x2 hand threaders include?
The set consists of two thread cutters - a peeler and a finisher, which, when used consecutively, guarantee full thread formation.
2. Is the M22x2 DIN 2181 threader suitable for blind holes?
Yes, the set can be used for both through-holes and blind holes.
3. What materials is the M22x2 tapping tool designed for?
The HSS tool works well for low-carbon steel, aluminum, brass and other materials with good machinability.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
