Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of the M62x3 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M62 |
| Thread pitch P mm | 3 mm |
| Overall length l1 | 200 mm |
| Length of working part l2 | 65 mm |
| Diameter of shank part d2 | 40 mm |
| Size of square drive a | 31 mm |
| Threaded bore diameter | 59 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M62x3 fine thread hand taps
Hand Tap M62x3 ISO 529/2 6H HSS is designed for making precision metric threads with a diameter of sixty-two millimeters and a pitch of three millimeters. The tool is used in the machining of structural steels and metal alloys with strengths up to eight hundred megapascals, providing a stable outline and repeatable joint geometry.
Performance parameters include a nominal diameter of 62 mm and a stroke of 3 mm. The metric sixty-degree outline specified in ISO 68-1 and the 6H bore tolerance according to ISO 965 guarantee the required fit. The threads are made as right-handed, and straight chip grooves promote controlled evacuation of the excavated material. HSS high-speed steel maintains sharpness after grinding and reduces micro chipping. The two-part arrangement provided for in ISO 529/2 - an introductory part (I) and a finishing part (II) - balances torsional torque and stabilizes the process. In technical practice, the selection and sequence of work is organized by the M62x3 Hand Tapping Set. Recommended drill: 59.0 mm; use of emulsion or active oil increases the quality of the finish and extends the life of the edge.
- Cutting smoothness - dividing machining into two stages reduces torque pulsations and allows for uniform coil formation.
- Wear resistance - ground HSS slows the dulling process and provides a clean thread contour.
- Fitting accuracy - 6H tolerance allows positive inspection with "pass/fail" gauges.
- Safe guidance - clear member markings help maintain sequence and reduce the risk of errors.
ISO 529/2, ISO 68-1 and ISO 965 standards confirm compliance with inspection apparatus and predictability of machining results. In assembly applications, consistent repeatability of results is supported by Set Taps Manual M62x3, making it suitable for both single-unit and short-run production.
M62x3 thread cutting stages in a 2-piece set: peeler and finisher
Frequently asked questions
1. What does the M62x3 set include?
The set consists of two thread cutters - a peeler and a finisher, which, when used in succession, guarantee full thread formation.
2. What materials is the M62x3 tapping tool designed for?
The HSS tool works well for low-carbon steel, aluminum, brass and other materials with good machinability.
3. What kind of pre-drilling for M62x3?
Drill 59 mm (62 mm diameter minus 3 mm pitch) to get the correct 6H grade profile fill.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
