Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical specifications of the M16x1 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M16 |
| Thread pitch P mm | 1 mm |
| Overall length l1 | 80 mm |
| Length of working part l2 | 18 mm |
| Diameter of shank part d2 | 12 mm |
| Size of square drive a | 9 mm |
| Threaded bore diameter | 15 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M16x1 fine thread hand taps
Hand Tap M16X1 DIN 2181/2 6H HSS used for cutting metric fine-coil threads in steel and cast iron materials provides a precise 60-degree profile; in daily use, hand Tap M16x1 maintains stable hole dimension and consistent coil shape.
Technical characteristics: size M16, pitch P=1; metric 60-degree profile; HSS high-speed steel, ground finish; straight grooves for controlled chip breakage; cylindrical shank with square driver; right-hand direction; recommended 15.00 mm drill bit, which supports proper profile filling and alignment in hand guidance.
- Process control. Graduated nut balances loads and reduces input edge deformation.
- Dimension compatible with the fit. The 6H grade hole is compatible with 6g male threads, maintaining nominal clearance in the joint.
- Durable machining. HSS provides wear resistance for reversing maneuvers to chipbreaking, promoting surface smoothness.
- Efficiency of runs. In hand sets, a set of M16x1 hand taps shortens access to the full profile in hard-to-reach holes.
Standardizationrange: design according to DIN 2181/2; outline according to ISO 68-1; stroke series according to ISO 261/262; tolerances according to ISO 965, hole class 6H. The M16X1 DIN 2181/2 6H HSS Hand Tapping Set maintains geometry and roughness parameters in unit operations and controlled assembly runs.
M16x1 thread cutting stages in 2-piece set: ripper and finisher
Frequently asked questions
1. What materials is the M16x1 thread cutter designed for?
The HSS tool works well on low-carbon steel, aluminum, brass and other materials with good machinability.
2. What does the M16x1 set include?
The set consists of two threaders - a peeler and a finisher, which, when used consecutively, guarantee full thread formation.
3. Is the M16x1 DIN 2181 thread cutter suitable for blind holes?
Yes, the set can be used in both through-holes and blind holes, in accordance with DIN 2181 and class 6H.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
